Table of Contents
Advertisement
MAIN INDEPENDENT CONTROLS
2
1
CONTROLS ON LEFT HANDLEBAR
NOTE
The electric components only operate when the ignition
switch is in the
position.
"
"
1) DIRECTION INDICATORS SWITCH (
Move the switch to the left, before turning left; move it to the
right before turning right. Push in to cancel the indicators after
turning.
2) HORN BUTTON (
)
Press it to operate the horn.
NOTE
When the indicator repeater light flashes quickly, this
indicates that one or both turn indicator bulbs are burned out. For
replacement instructions, please see page 97 (CHANGING THE
HEADLIGHT BULBS).
6
5
4
3
)
3) LIGHT DIMMER SWITCH: Set it to "
beam; set it to "
" to operate the low beam.
4) LCD CONFIGURATION SELECTOR:
Select the LCD displayed configuration, see page 33
(MULTIFUNCTION COMPUTER).
5) HIGH BEAM FLASHER BUTTON (
Allows for the use of the passing lights in case of danger or
emergency.
NOTE
Release the button to turn off the high beam flasher.
6) SET BUTTON
Button to scroll and select the displayed menus, see page 33
(MULTIFUNCTION COMPUTER).
" to operate the high
)
use and maintenance Griso
39
Advertisement
Table of Contents
