EPOX EP-61LXA-M Manual page 35

BIOS
AGP Aperture Size: The amount of system memory that the AGP card is allowed
to share.
The default is 4.
4: 4MB of systems memory accessable by the AGP card.
8: 8MB of systems memory accessable by the AGP card.
16: 16MB of systems memory accessable by the AGP card.
32: 32MB of systems memory accessable by the AGP card.
64: 64MB of systems memory accessable by the AGP card.
128: 128MB of systems memory accessable by the AGP card.
256: 256MB of systems memory accessable by the AGP card.
SDRAM RAS# to CAS# Delay: Allows you to insert a timing delay between the
CAS and RAS strobe signals, used when SDRAM is written to, read from, or
refreshed.
The default is Fast.
Fast: Provides faster memory performance.
Slow: Provides better memory compatibility.
SDRAM Precharge Time: The precharge time is the number of cycles it takes for
the RAS to accumulate its charge before SDRAM refresh. If insufficient time is
allowed, refresh may be incomplete and the SDRAM may fail to retain data.
The default is Fast.
Fast: Provides faster memory performance.
Slow: Provides better memory compatibility.
SDRAM CAS Latency Time: This setting defines the CALT timing parameter of
the SDRAM in terms of clocks.
The default is 3.
2: Provides faster memory performance.
3: Provides better memory compatibility.
CPU Warning Temperature: This is the temperature that the computer will
respond to an overheating CPU.
The default is disabled.
Enabled: Temperature is monitored on the CPU
Disabled: This feature is turned off.
Page 4-12
EP-61LXA-M