EPOX EP-61LXA-M Manual page 21

EP-61LXA-M
bottom make sure you press firmly on SEC cartridge to firmly secure into the Slot 1
Socket.
Now we need to secure the heatsink with the top half of the support (figure 11).
Take the top piece of the support and slide it into the bottom fin (figure 11) on the
heatsink and then push forward until it clips into the bottom base (figure 9) that is
already there (figure 11).
Figure 9 shows the layout of Slot 1 and the holes for mounting the Heatsink base
piece (figure 8).
Large Hole for Heat Sink Base
Bottom fin
of heatsink
Figure 9
CPU Car tr idge SLOT 1
Small Hole for Heat Sink Base
Figure 10
Top half of the support
Figure 11
Installation
Motherboard
Layout
Bottom fin
of heatsink
Page 3-7