I/O Shield Connector; Power-On/Off (Remote) - EPOX EP-61LXA-M Manual

Introduction

I/O Shield Connector

The EP-61LXA-M is equipped with an I/O back panel. Please use the appropriate
I/O shield (figure 3).
Figure 3:
EP-61LXA-M
I/O back
panel layout

Power-On/Off (Remote)

The EP-61LXA-M has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected to
the systems front panel for system Power On/Off button. The systems power On/
Off button should be a momentary button that is normally open.
The EP-61LXA-M has been designed with "Soft Off" functions. You can turn Off
the system from one of two sources: The first is the front panel Power On/Off
button, and the other is the "Soft Off" function (coming from the EP-61LXA-M's
onboard circuit controller) that can be controlled by the operating system. Windows
95 will control this when the user clicks that they are ready to Shutdown the system.
J 3
EP-61LXA-M Board
Figure 4: Simple ATX Power ON/OFF Controller
Page 1-6
PS/2 Mouse
PS/2 Keyboard
Case (chassis) Power
ON/OFF button (J 3)
Parallel Port
USB COM1
ATX
POWER SUPPLY
EP-61LXA-M
COM2