EPOX EP-61LXA-M Manual page 34

EP-61LXA-M
8 Bit I/O Recovery Time: This function allows you to set the wait state that is
added to an 8 bit ISA instruction originated by the PCI bus.
The default is 3.
NA: No wait state
1: 1 wait states
3: 3 wait states
5: 5 wait states
7: 7 wait states
16 Bit I/O Recovery Time: This function allows you to set the wait state that is
added to an 16 bit ISA instruction originated by the PCI bus.
The default is 2.
NA: No wait state
3: 3 wait states
1: 1 wait states
Memory Hole at 15M-16M: You can reserve this memory area for the use of
ISA adaptor ROMs.
The default is Disabled.
Enabled: This field enables the main memory (15~16MB) to remap to ISA
BUS.
Disabled: Normal Setting.
NOTE: If this feature is enabled you will not be able to cache this
memory segment.
Passive Release: This option allows access from the CPU to PCI bus to be active
during passive release. Otherwise, the arbiter only accepts another PCI master
access to local DRAM.
The default is Enabled.
Enabled: Enabled
Disabled: Disabled
Delayed Transaction: This option allows the chipset to use its embedded 32-bit
posted write buffer to support delay transactions cycles.
The default is Disabled.
Enabled: Select enabled to support PCI 2.1 specification.
Disabled: Disabled.
8: 8 wait states
2: 2 wait states
4: 4 wait states
6: 6 wait states
4: 4 wait states
2: 2 wait states
BIOS
Page 4-11