Triumph Sprint ST Owner's Handbook Manual page 88

Maintenance and Adjustment
Rear Brake - Sprint ST
1
2
ccns
4
1. Upper level line
2. Lower level line
3. Starter solenoid/Main fuse assembly
4. Rear brake fluid reservoir
Level Inspection
The rear brake fluid level can be inspected
without removing the seat. The reservoir is
visible from the right hand side of the
motorcycle, forward of
intermediate pipe, below the seat.
88
Level Adjustment
Remove the seat.
Disconnect the battery, negative (black) lead
first.
The starter solenoid and main fuse are
attached
mounting fits over the rear brake fluid
reservoir filler cap.
To gain access to the filler cap, gently pull off
the starter solenoid/main fuse assembly with
the rubber mounting.
Remove the reservoir cap. Fill the reservoir to
the upper level line using new DOT 4 fluid
from a sealed container.
3
Refit the reservoir cap ensuring that the
diaphragm seal is correctly fitted.
Refit the starter solenoid/main fuse assembly.
Reconnect the battery, positive (red) lead first.
Refit the seat.
the exhaust
to a rubber mounting. This