Battery Installation; Fuse Box - Triumph Sprint ST Owner's Handbook Manual

Maintenance and Adjustment
For extended periods of storage (beyond two
weeks) the battery should be removed from
the motorcycle and kept charged using a
Triumph approved maintenance charger.
Similarly, should the battery charge fall to a
level where it will not start the motorcycle,
remove the battery from the motorcycle
before charging.

Battery Installation

Warning
Ensure that the battery terminals do not
touch the motorcycle frame as this may
cause a short circuit or spark, which would
ignite battery gases causing a risk of
personal injury.
Place the battery in the battery case.
Reconnect the battery, positive (red) lead first.
Apply a light coat of grease to the terminals
to prevent corrosion.
Cover the positive terminal
protective cap.
Refit the battery strap.
Refit the seat.
102

Fuse Box

Sprint ST
1
ccnp
1. Fuse box
The fuse box is located beneath a removable
panel on the right hand side of the front
fairing.
To allow access to the fuse box, insert the
ignition key and remove the panel.
with the