Toshiba BU238M Instruction Manual page 25

● In Random Trigger Shutter mode
TRIG_IN
Exposure
USB bus
TRIG_IN
Exposure
USB bus
* The value of T1 is the same as the value of normal shutter mode.
* T3 and T4 are typical value.
Notes of random trigger shutter mode:
- In the period when FRAME_TRIGGER_WAIT (GPIO signal) is inactive, user must not input external trigger signal to
this camera.
-
When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility
of causing the malfunction. In this case, please input a proper trigger signal.
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
T3
Edge mode (Image format: Mono 8, all pixels readout)
T3
Level mode (Image format: Mono 8, all pixels readout)
T3 [μs]
4.9
Image
T1
T4
Image
T1
T4 [μs]
4.9
25 / 79
D4235159A
http://www.toshiba-teli.co.jp/index.htm