Toshiba BU238M Instruction Manual page 52

- Select the polarity of each signal
Set the following value to "LineInverterAll" register. The setting value is Integer type.
Each bit corresponds to each Line. Both Line0 and Line1 are settable.
Inverter is also inserted to UserOutputValue.
TRIG_IN
GPIO_OUT
(Line1)
GPIO_OUT
(Line2)
● Note
About the details of Timer0Active signal, refer to "TimerControl" of "Functions".
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
LineInverterAll
0 (*)
1
* initial factory setting
Line0
Line1
Line2
LineModeAll LineInverterAll
GPIO internal circuit diagram
52 / 79
Function
non inverted
inverted
Internal Trigger
Timer0Active
TimerControl
UserOutput
UserOutputValueAll[1]
ExposureActive
FrameTransfer
FrameActive
FrameTriggerWait
UserOutput
UserOutputValueAll[2]
LineSource
http://www.toshiba-teli.co.jp/index.htm
D4235159A