Table of Contents
Advertisement
Preparation 2
Opening the "Basic
2
configuration page"
20
To change the configurations of the product, open the "Basic configuration page" using a Web browser
on a PC connected to the product.
Follow the steps below to open the "Basic configuration page".
Note
• To use the "Basic configuration page", you need Windows Internet Explorer 8 or later.
• The descriptions in this manual use Windows 7 and Internet Explorer 9 screens as examples. For other
environments, you have slightly different screen displays, though operations stay the same.
Tip
If you enter commands in a console window using Telnet software, you can configure settings in more detail
compared to doing them in the "Basic configuration page" (console commands). For details on connecting to
the product using Telnet software, please refer to page 118. For information on the commands available to the
product, please refer to "Command reference" (included in the attached CD-ROM).
Hide quick links:
Advertisement
Table of Contents
