Yamaha RTX810 Instruction Manual page 136

Checking the configuration information and log of the
product
(Continued from the previous page)
4
To stop saving the log, select "terminate" in the
"Save Syslog" field on the "Configure external
device" screen, and click "Submit".
5
Hold down the USB button or microSD button
for two seconds.
The USB lamp or microSD lamp of the product goes
off.
6
Remove the external memory device.
7
Note
• The log is not recorded immediately after the start, immediately
after inserting a USB memory stick, and right before removing
the USB memory stick.
• The log cannot be written to the USB memory stick until it
is ready to be written.
• If saving of the log to the external device fails, see "Unable
to use USB device" (page 152).
136
Notes on the log to be saved
When you start saving the log, the following log files are
generated in the USB memory stick or microSD card.
• A file to which the log is currently written: The file name
is the same as that specified in the "Save administration
information" field on the "Configure external device"
screen.
• A backup file generated for each certain size: The file
name is generated by adding saved date/time to the above
file name.
Restriction of backup file
If the number of backup files has reached the defined upper
limit, or the memory in the external memory device is full,
the oldest backup file is deleted.
Note
If the external memory device does not have sufficient free
space, the defined log file size or number of backup files
may be different from that actually generated.