Yamaha RTX810 Instruction Manual page 122

Changing the product settings
Specify the console port to connect
From the PC connected to the console port, log in the
product using a terminal software program, and send console
commands to configure settings. The following explains an
example using Windows XP and Hyper Terminal.
Note
You should fully understand the behavior of a console command
before using it. After configuring a setting in "Basic configuration
page", if you change the setting with a console command, an
unintended operation may be resulted. Be sure to check whether
the command behaves as you intended after changing the setting.
7
Tip
Please refer to "Command reference" (included in the attached
CD-ROM) for more details on console commands.
1
From the "Start" menu, click "All Programs"
- "Accessories" - "Communications" - "Hyper
Terminal".
The "Connect To" screen appears.
2
Type a connection name into the "Name" field,
and click "OK".
You can specify a desired connection name.
3
After selecting the serial port number confirmed
in the previous page, click "OK".
The "COMx properties" screen appears.
122
(Continued from the previous page)
4
Change the communication settings to the
following values:
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Xon/Xoff
5
Click "OK".
The Hyper Terminal screen appears.
The subsequent procedure is the same as step 3 of
"Connect with TELNET" (page 118).