Table of Contents
Advertisement
Permit upgrading the firmware using
the DOWNLOAD button
Use the "Configure DOWNLOAD button" screen.
If you want to upgrade the firmware using the DOWNLOAD
button, select "Revision up".
For more details on the settings, click "Help" on the setup
screen and refer to the description displayed.
To open the "Configure DOWNLOAD button"
screen
From "Basic configuration page", click the buttons on the
setup screen in the following order:
▶ "Advanced settings" in the top page
▶ "Configure" of "Configure DOWNLOAD button"
Upgrade the firmware by pressing the
DOWNLOAD button
You can hold down the DOWNLOAD button for three
seconds to find a new revision of firmware. If a new revision
of firmware is found, it is automatically download to
upgrade the existing firmware.
Note
If downloading the firmware or upgrading the existing firmware
fails, see "The DOWNLOAD button does not function" (page 151).
When the firmware has been upgraded
The product restarts.
Upgrading the firmware in
"Basic configuration page"
Use the "Execute revision up" screen.
You can click "Execute" to find a new revision of firmware.
If a new revision of firmware is found, the revision number
is displayed on the screen together with the revision number
of the existing firmware. In this state, click "Execute" again
to download the new firmware and automatically upgrade
the existing firmware.
For more details on the settings, click "Help" on the setup
screen and refer to the description displayed.
Tip
If you change the "Allow for revision down" setting to "allow"
on the "Execute revision up" screen, you can downgrade the
firmware to an older version (Revision down).
To open the "Execute revision up" screen
From "Basic configuration page", click the buttons on the
setup screen in the following order:
▶ "Advanced settings" in the top page
▶ "Execute" of "Execute revision up" screen
When the firmware has been upgraded
The product restarts.
7
129
Hide quick links:
Advertisement
Table of Contents
