Hoover Heritage 5210 Instructions For Use Manual page 7

Instructions for Use
Support
board
Connector
Connect hole
(continued)
Charging the cleaner
1. Connect the power plug on the
battery charger to the power socket.
2. Connect the stick vac to the charging
base. The stick vac should be able
to stand alone once correctly
connected to the charging base.
3. The indicator on the cleaner turns
red whilst it is charging. Once fully
charged the indicator will turn green
(approximately 6-8 hours).
4. Once the stick vac has been
charged it can be removed from
the charging base for use or it
can remain on the charging base
which also acts as a holder.
Note:
Once the stick vac has been
fully charged, it is recommended that
the charging base is unplugged from
the mains power supply.
How to operate the stick vac
On / off button
Hand vac
Indicator
1. Press the button under the handle of the hand vac
to release the unit from the body of the cleaner.
2. Press the on/off button to turn on the hand vac
– a blue light will appear when the hand vac is
operational.
3. Press the on/off Button to turn the hand vac off.
Stick vac
On / off button 1. Ensure the hand vac is placed back into the body
of the stick vac.
2. Press the on/off button at the handle end of the
stick vac to turn on the stick vac. A blue light will
appear on the electrical brush head when
the stick vac is operational.
3. Press the on/off Button to turn the stick vac off.