Recording; Basic Recording For Video - JVC GR-DVM90 Instructions Manual

18
EN
START/STOP Button
Display
min
90 min
(Now calculating)
0 min
(Blinking)
Tally lamp
(lights while
recording is
in progress)
BR I GHT
90
180
POWER Switch
POWER Lamp
Lock Button
MODE Dial
2 5
Tape remaining
time indicator
(Approximate)
3 min
89 min
2 min
1 min
(Blinking) (Blinking)
MENU Wheel

RECORDING

NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power ( pg. 8)
Grip Adjustment (
Viewfinder Adjustment (
Load A Cassette (
Recording Mode Setting (
1
Set the MODE Dial to "VIDEO" and set the POWER
Switch to "
Button located on the switch.
Shooting while using the viewfinder: Make sure the
LCD monitor is closed and locked. Pull out the
viewfinder fully.
•Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
Shooting while using the LCD monitor: Make sure
the viewfinder is pushed back in. Open the LCD
monitor fully.
•The POWER lamp lights and the camcorder enters
the Record-Standby mode. "PAUSE" is displayed.
2
Press START/STOP. "
in progress.
To Stop Recording . . .
.... press START/STOP. The camcorder re-enters the
Record-Standby mode.
To Adjust The Brightness Of The Display
.... rotate the MENU wheel until the bright level indicator
on the display moves and the appropriate brightness is
reached.
•It is also possible to adjust the brightness of the viewfinder.

Basic Recording For Video

pg. 10)
pg. 10)
pg. 12)
pg. 13)
" while pressing down the Lock
" appears while recording is