Operation Mode - JVC GR-DVM90 Instructions Manual

16
EN
To turn on the camcorder, set the POWER
Switch to any operation mode except "OFF"
while pressing down the Lock Button located
on the switch.
POWER Lamp
When the POWER Switch is set to "
the type of file (IMAGE, E-MAIL CLIP or
SOUND) is displayed. When set to "
or " ", there is no indication.
I MAGE
When the Operation Switch is set to "
"F. AUTO" appears. When set to "
no indication.
F . AUTO

Operation Mode

Choose the appropriate operation mode according to your
preference using the POWER Switch, Operation Switch
and MODE Dial.
Allows you to record on a tape or in the
MultiMediaCard.
POWER Switch
OFF:
Allows you to switch off the camcorder.
Lock Button
Operation
Switch
Allows you to play back a recording on the tape or to
transfer a still image recorded on the tape or in the
MultiMediaCard to a computer.
Allows you to display an image stored in the
MultiMediaCard.
",
"
Allows you to set various recording functions using
the Menus. If you want more creative capabilities than
Full Auto recording, try this mode.
Allows you to record using NO special effects or
manual adjustments. Suitable for standard recording.
",
", there is
GETTING STARTED
POWER Switch Position
:
:
:
Operation Switch Position
(Manual):
(Full Auto):
(cont.)