Advertisement
Setting the Countdown Timer
To use the Countdown Timer, press the MODE button to select
the Timer mode.
1. When in Countdown Timer mode, press the MODE button
down for 2-3 seconds until the 'hour' digit flashes.
2. To set 'hour', press the ST/STP button to increase and RESET
button to decrease the setting.
3. To move to 'minutes', press and release the MODE button.
4. To move to 'seconds', press and release the MODE button.
5. After 'hours', 'minutes', and 'seconds' are set, hold the
MODE button down for 2-3 seconds until the display stops
flashing. The settings are now saved.
Running the Countdown Timer
1. Once a countdown time has been set, press the ST/STP
button once to start the Timer.
2. The Timer will start counting from the countdown time down
to '0'.
3. At 5 seconds before finish, the Watch will start to beep. This
will continue for 15 seconds.
4. To stop the beeping early, press any button (except the LIGHT
button).
5. The Countdown Timer will then return to the original
countdown time.
Advertisement
