Martin Exterior 1200 User Manual page 6

• Provide a minimum center-to-center distance of 800 mm (31.5 in.) between Exterior
1200 Image Projector luminaires.
• Install the luminaire outdoors or in a well ventilated area.
• Do not place filters or other materials over the lens. Use only Martin approved
accessories to mask or modify the light beam.
Preventing injury due to falls and while lifting
• Ensure that all external covers, components and installation fittings are securely
fastened.
• The luminaire weighs 90 kg (198.4 lbs.). At least two people are required to lift, move
and adjust it. Do not attempt to lift the luminaire or adjust the beam angle alone.
• Block access below the work area and work from a stable platform whenever installing,
servicing or moving the luminaire.
• Ensure that all supporting structures, surfaces, fasteners and lifting equipment can bear
the weight of all the devices they are intended to support plus an adequate safety
margin, and that they conform to local building and safety regulations.
• Use a sufficient number of fasteners with sufficient corrosion resistance, dimensions and
strength to mount the luminaire safely. Any nuts used must be self-locking. The washers
supplied with the luminaire must be installed directly under the fasteners' heads when
anchoring the yoke base to the installation surface.
• The four eyebolts supplied are for lifting purposes during installation or service only. Do
not expose them to undue stress while lifting, by allowing the luminaire to drop and then
catching it again, for example. Do not use the eyebolts for safety attachment.
6 Exterior 1200 Image Projector user manual