Sli Tm , 3-Way Sli Tm And Quad Sli Tm Operation Guide; Installing Two Sli Tm -Ready Graphics Cards - ASROCK Fatal1ty X99X Killer Series User Manual

TM
2.9 SLI , 3-Way SLI
This motherboard supports NVIDIA
Link Interface) technology that allows you to install up to three identical PCI
Express x16 graphics cards. Currently, NVIDIA
®
supports Windows 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
* If you install CPU with 28 lanes, 3-Way SLI
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA
the drivers from the NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
®
the NVIDIA website for details.
2.9.1 Installing Two SLI
TM TM
and Quad SLI
® TM
SLI , 3-Way SLI
® TM
SLI
TM
is not supported.
TM
-ready graphics cards that are NVIDIA
®
website: www.nvidia.com
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
Fatal1ty X99X Killer Series
Operation Guide
TM TM
and Quad SLI (Scalable
TM
and Quad SLI technology
®
certified.
® SLI TM technology. Download
® certified PSU. Please refer to
29