Sli Tm , 3-Way Sli Tm , 4-Way Sli Tm And Quad Sli; Installing Two Sli; Tm -Ready Graphics Cards - ASROCK Z87EXTREME11/ac User Manual

TM
2.9 SLI , 3-Way SLI
Guide
This motherboard supports NVIDIA
TM
SLI (Scalable Link Interface) technology that allows you to install up to four
identical PCI Express x16 graphics cards. Currently, NVIDIA
TM
SLI technology supports Windows
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA
the drivers from the NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
the NVIDIA ® website for details.

2.9.1 Installing Two SLI

TM TM
, 4-Way SLI and Quad SLI
® TM
SLI , 3-way SLI
®
7 / 7 64-bit / 8 / 8 64-bit OS.
TM
-ready graphics cards that are NVIDIA
®
website: www.nvidia.com
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE5 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
Operation
TM TM
, 4-way SLI and Quad
® TM
SLI and Quad
®
certified.
® TM
SLI technology. Download
®
certified PSU. Please refer to
Z87 Extreme11/ac
39