ASROCK Fatal1ty X299 Professional Gaming i9 XE Series Manual

ASROCK Fatal1ty X299 Professional Gaming i9 XE Series Manual

Advertisement

Version 1.0
Published September 2017
Copyright©2017 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fatal1ty X299 Professional Gaming i9 XE Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ASROCK Fatal1ty X299 Professional Gaming i9 XE Series

  • Page 1: Copyright Notice

    (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Page 3 CE Warning This device complies with directive 2014/53/EU issued by the Commision of the European Community. This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &...
  • Page 4: Motherboard Layout

    Fatal1ty X299 Professional Gaming i9 XE Series Motherboard Layout ATX12V1 ATX12V2 CPU_FAN1 M2_WIFI_1 RGB_LED2 BIOS _FB1 CLRC BTN1 2066 Socket USB 3.1 Gen1 Top: T: USB1 RJ-45 B: USB2 USB 3.1 Gen1 Top: T: USB3 RJ-45 B: USB4 USB 3.1 Gen2...
  • Page 5 No. Description 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) ATX 12V Power Connector (ATX12V2) ATX 12V Power Connector (ATX12V1) 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2) 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1) CPU Fan Connector (CPU_FAN1) RGB LED Header (RGB_LED2) ATX Power Connector (ATXPWR1)
  • Page 6 Fatal1ty X299 Professional Gaming i9 XE Series I/O Panel No. Description No. Description Fatal1ty Mouse Port (USB1) Optical SPDIF Out Port USB 2.0 Port (USB2) USB 3.1 Gen2 Type-A Port (USB31_TA_1) LAN RJ-45 Port (Intel® I211AT)* USB 3.1 Gen2 Type-C Port (USB31_TC_1) 10 GLAN RJ-45 Port (AQUANTIA®...
  • Page 7 ** There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link Orange 100Mbps/1Gbps/2.5Gbps Blinking Data Activity...
  • Page 8: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Page 9: Specifications

    933(OC)/2800(OC)/2666/2400/2133 non-ECC, un-buffered memory * The maximum memory frequency supported may vary by processor type. * Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/) • Supports non-ECC RDIMM (Registered DIMM) • Max. capacity of system memory: 128GB • Supports Intel®...
  • Page 10 Fatal1ty X299 Professional Gaming i9 XE Series • Supports AMD Quad CrossFireX , 3-Way CrossFireX and CrossFireX ** 3-Way CrossFireX is only supported with CPU with 44 lanes or 28 lanes. • Supports NVIDIA® Quad SLI , 3-Way SLI and SLI *** This feature is only supported with CPU with 44 lanes or 28 lanes.
  • Page 11 * Ultra USB Power is supported on USB3_12 ports. * ACPI wake-up function is not supported on USB3_12 ports. • 4 x USB 3.1 Gen1 Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 3 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED LED) • 1 x BIOS Flashback Button...
  • Page 12 Fatal1ty X299 Professional Gaming i9 XE Series * If M2_3 is occupied by a SATA-type M.2 device, SATA3_7 will be disabled. • 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup- port NCQ, AHCI and Hot Plug • 1 x Ultra M.2 Socket (M2_2), supports M Key type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module...
  • Page 13 PCIe slot (depending on CPU type). • 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection)) • 2 x USB 3.1 Gen1 Headers (Support 4 USB 3.1 Gen1 ports) (ASMedia ASM1074 Hub) (Supports ESD Protection (AS- Rock Full Spike Protection)) • 1 x Front Panel Type C USB 3.1 Gen2 Header (ASMedia...
  • Page 14 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.
  • Page 15: Wifi-802.11Ac Module And Asrock Wifi 2.4/5 Ghz Antenna

    1.3 WiFi-802.11ac Module and ASRock WiFi 2.4/5 GHz Antenna WiFi-802.11ac + BT Module This motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ac + BT v4.2 module (pre-installed on the rear I/O panel) that offers support for WiFi 802.11 a/b/ g/n/ac connectivity standards and Bluetooth v4.2. WiFi + BT module is an easy-to- use wireless local area network (WLAN) adapter to support WiFi + BT.
  • Page 16 Fatal1ty X299 Professional Gaming i9 XE Series WiFi Antennas Installation Guide Step 1 Prepare the WiFi 2.4/5 GHz Antennas that come with the package. Step 2 Connect the two WiFi 2.4/5 GHz Antennas to the antenna connectors. Turn the antenna clock- wise until it is securely connected.
  • Page 17: Chapter 2 Installation

    Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Page 18: Installing The Cpu

    Fatal1ty X299 Professional Gaming i9 XE Series 2.1 Installing the CPU 1. Before you insert the 2066-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 20 Fatal1ty X299 Professional Gaming i9 XE Series Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Page 21: Installing The Cpu Fan And Heatsink

    2.2 Installing the CPU Fan and Heatsink...
  • Page 22: Installation Of Memory Modules (Dimm)

    Fatal1ty X299 Professional Gaming i9 XE Series 2.3 Installation of Memory Modules (DIMM) This motherboard provides eight 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Quad Channel Memory Technology. 1. For quad channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
  • Page 23 • For CPU with 16 PCIe lanes, please install the memory modules on DDR4_C1, C2, D1 and D2 only.
  • Page 24: Expansion Slots (Pci Express Slots)

    Fatal1ty X299 Professional Gaming i9 XE Series 2.4 Expansion Slots (PCI Express Slots) There are 5 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Page 25 PCIe Slot Configurations (For CPU with 28 PCIe lanes) PCIE1 PCIE2 PCIE3 PCIE4 PCIE5 M2_1 Single Graphics Card Two Graphics Cards in CrossFireX or SLI Mode Three Graphics Cards in 3-Way CrossFireX Mode or 3-Way SLI Mode PCIe Slot Configurations (For CPU with 16 PCIe lanes) PCIE1 PCIE2 PCIE3...
  • Page 26: Jumpers Setup

    Fatal1ty X299 Professional Gaming i9 XE Series 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.
  • Page 27: Onboard Headers And Connectors

    2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Page 28 Fatal1ty X299 Professional Gaming i9 XE Series Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 19) header. PLED+ PLED+ PLED- Serial ATA3 Connectors...
  • Page 29 (19-pin USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (see p.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Front Panel Type C USB There is one Front 3.1 Gen2 Header Panel Type C USB 3.1 (26-pin USB31_TC_2) Gen2 Header on this (see p.1, No.
  • Page 30 Fatal1ty X299 Professional Gaming i9 XE Series Chassis Fan Connectors Please connect fan cables (4-pin CHA_FAN1) to the fan connectors and (see p.1, No. 20) match the black wire to FAN_SPEED_CONTROL CHA_FAN_SPEED (4-pin CHA_FAN2) the ground pin. FAN_VOLTAGE (see p.1, No. 33)
  • Page 31 ATX 12V Power This motherboard Connectors provides two 8-pin ATX (8-pin ATX12V1) 12V power connectors. To (see p.1, No. 4) use a 4-pin ATX power (8-pin ATX12V2) supply, please plug it along (see p.1, No. 3) Pin 1 and Pin 5. TPM Header This connector supports Trusted (17-pin TPMS1)
  • Page 32 Fatal1ty X299 Professional Gaming i9 XE Series Virtual RAID On CPU This connector supports Intel® Header Virtual RAID on CPU and (4-pin VROC1) +3VSB NVME/AHCI RAID on CPU (see p.1, No. 29) PCIE. VROC RAID KEY With the introduction of the Intel VROC product, there are three modes of operation:...
  • Page 33: Smart Switches

    To use USB BIOS Flashback function, press the BIOS Flashback Switch for three seconds. Please follow the steps below. 1. Download the latest BIOS file from ASRock's website : http://www.asrock.com. 2. Copy the BIOS file to your USB flash drive.Please make sure the file system of your USB flash drive must be FAT32.
  • Page 34 Fatal1ty X299 Professional Gaming i9 XE Series 2.8 Dr. Debug Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes. Code Description Please check if the CPU is installed correctly and then clear CMOS.
  • Page 35 Problem related to USB devices. Please try removing all USB devices. Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
  • Page 36 Fatal1ty X299 Professional Gaming i9 XE Series 2.9 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express...
  • Page 37 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Page 38 Fatal1ty X299 Professional Gaming i9 XE Series M.2_SSD (NGFF) Module Support List Vendor Interface ADATA SATA3 AXNS330E-32GM-B ADATA SATA3 AXNS381E-128GM-B ADATA SATA3 AXNS381E-256GM-B ADATA SATA3 ASU800NS38-256GT-C ADATA SATA3 ASU800NS38-512GT-C ADATA PCIe3 x4 ASX8000NP-256GM-C ADATA PCIe3 x4 ASX8000NP-512GM-C Crucial SATA3 CT120M500SSD4...
  • Page 39 SATA3 WDS100T1B0B-00AS40 SATA3 WDS240G1G0B-00RC30 PCIe3 x4 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Page 40 Fatal1ty X299 Professional Gaming i9 XE Series 2.10 ASRock RGB LED ASRock RGB LED is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Page 41 ASRock RGB LED Utility Now you can adjust the RGB LED color through the ASRock RGB LED utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Page 42 Fatal1ty X299 Professional Gaming i9 XE Series 1 Einleitung Vielen Dank, dass Sie sich für die ASRock Fatal1ty X299 Professional Gaming i9 XE Series entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Page 43: Technische Daten

    • Digi Power design • 13-Leistungsphasendesign • Unterstützt Intel® Turbo Boost Max Technology 3.0 * Bitte beachten Sie, dass die 4-Kern-Prozessoren nur Intel® Turbo Boost Technology 2.0 unterstützen. • Unterstützt ASRock Hyper-BCLK-Engine III Chipsatz • Intel® X299 Speicher • Vierkanal-DDR4-Speichertechnologie • 8 x DDR4-DIMM-Steckplätze...
  • Page 44 Fatal1ty X299 Professional Gaming i9 XE Series • Unterstützt AMD Quad CrossFireX , 3-Wege-CrossFireX und CrossFireX ** 3-Way CrossFireX wird nur mit CPUs mit 44 oder 28 Lanes unterstützt. • Unterstützt NVIDIA® Quad SLI , 3-Way SLI und SLI *** Diese Funktion wird nur mit CPUs mit 44 oder 28 Lanes unterstützt.
  • Page 45 Entladung) * 1 x Fatal1ty-Mausanschluss (USB 2.0) ist inklusive • 1 x USB 3.1-Gen2-Typ-A-Port (10 Gb/s) (ASMedia ASM3142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.1-Gen2-Typ-C-Port (10 Gb/s) (ASMedia ASM3142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock...
  • Page 46 Fatal1ty X299 Professional Gaming i9 XE Series * Wenn M2_3 durch ein SATA-Typ-M.2-Gerät belegt ist, wird SATA3_7 deaktiviert. • 2 x SATA-III-6,0-Gb/s-Anschlüsse von ASMedia ASM1061, unterstützt NCQ, AHCI und Hot-Plugging • 1 x Ultra-M.2-Sockel (M2_2), unterstützt M-Key-Typ- 2230/2242/2260/2280/22110-M.2-SATA-III-6,0-Gb/s-Modul und M.2-PCI-Express-Modul bis Gen. 3 x 4 (32 Gb/s)** • 2 x Ultra-M.2-Sockel (M2_1 und M2_3), unterstützt M-Key-...
  • Page 47 • 1 x Audioanschluss an der Frontblende (15μ goldene Audioan- schluss) • 1 x Thunderbolt Erweiterungskartenanschluss (5-polig) • 2 x USB-2.0-Stiftleiste (unterstützen 4 USB-2.0-Ports) (unter- stützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 2 x USB 3.1-Gen1-Stiftleisten (unterstützen 4 USB 3.1-Gen1- Ports) (ASMedia ASM1074-Hub) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x Type-C-USB-3.1 Gen2-Stiftleiste für die Frontblende (AS-...
  • Page 48 • FCC, CE • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktung- swerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Page 49 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“ sind, wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
  • Page 50 Fatal1ty X299 Professional Gaming i9 XE Series 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen.
  • Page 51 Betrieb-LED- und Bitte verbinden Sie SPEAKER DUMMY Lautsprecher-Stiftleiste die Betrieb-LED des DUMMY (7-polig, SPK_PLED1) Gehäuses und den (siehe S. 1, Nr. 19) Gehäuselautsprecher mit dieser Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese zehn SATA-III-Anschlüsse (SATA3_0_1: unterstützen SATA-Datenkabel siehe S. 1, Nr. 14) für interne Speichergeräte mit (SATA3_2_3: einer Datenübertragungsgeschwi...
  • Page 52 Fatal1ty X299 Professional Gaming i9 XE Series (19-polig, USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (siehe S. 1, Nr. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Type-C-USB-3.1 Es gibt eine Type-C- Gen2-Stiftleiste für die USB-3.1 Gen2-Stiftleiste für...
  • Page 53 Gehäuselüfteranschlüsse Bitte verbinden Sie die (4-polig, CHA_FAN1) Lüfterkabel mit den (siehe S. 1, Nr. 20) Lüfteranschlüssen; der FAN_SPEED_CONTROL CHA_FAN_SPEED (4-polig, CHA_FAN2) schwarze Draht gehört FAN_VOLTAGE (siehe S. 1, Nr. 33) zum Erdungskontakt. Optionales-Gehäuse-/ Dieses Motherboard bietet einen Wasserpumpen- 4-poligen Wasserkühlung-Ge- Lüfteranschluss häuselüfteranschluss.
  • Page 54 Fatal1ty X299 Professional Gaming i9 XE Series ATX-12-V-Netzanschlüsse Dieses Motherboard bietet zwei (8-polig, ATX12V1) 8-polige ATX-12-V-Netzan- (siehe S. 1, Nr. 4) schlüsse. Bitte schließen Sie es (8-polig, ATX12V2) zur Nutzung eines 4-poligen (siehe S. 1, Nr. 3) ATX-Netzteils entlang Kontakt 1 und Kontakt 5 an.
  • Page 55 Virtual RAID an der Dieser Anschluss unterstützt CPU-Stiftleiste Intel® Virtual RAID an CPU und (4-polig VROC1) +3VSB NVME/AHCI RAID an CPU (siehe S. 1, Nr. 29) PCIE. VROC RAID KEY Mit der Einführung des Intel-VROC-Produktes gibt es drei Betriebsmodi: HW-Taste Wesentliche Funktionen und Merkmale erforderlich • Nur Pass-thru (ohne RAID)
  • Page 56 Fatal1ty X299 Professional Gaming i9 XE Series 2.7 Intelligente Schalter Das Motherboard hat vier intelligente Schalter: Ein-/Austaste, Reset-Taste, CMOS- leeren-Taste und ein BIOS-Flashback-Taste ermöglichen schnelles Ein-/Ausschalten des Systems, Rücksetzung des Systems, Löschung der CMOS-Werte und Leerung des BIOS. Ein-/Austaste Mit der Ein-/Austaste kann der...
  • Page 57: Contenu De L'emballage

    Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez. La liste la plus récente des cartes VGA et des processeurs pris en charge est également disponible sur le site Internet de ASRock. Site Internet ASRock http://www.asrock.com.
  • Page 58: Spécifications

    • Prend en charge la technologie Intel® Turbo Boost Max 3.0 * Veuillez noter que les processeurs à 4 cœurs ne prennent en charge que la technologie Intel® Turbo Boost 2.0. • Prend en charge le moteur Hyper BCLK III ASRock Chipset • Intel® X299 • Technologie mémoire quadruple canal DDR4...
  • Page 59 TIA® AQC107): • Prend en charge la fonction Wake-On-LAN • Protection contre les orages/décharges électrostatiques (Protec- tion complète contre les pics ASRock) • Prend en charge PXE 2 x Gigabit LAN 10/100/1000 Mb/s (1 x Intel® I219V, 1 x Intel®...
  • Page 60 Fatal1ty X299 Professional Gaming i9 XE Series • Prend en charge la technologie Dual LAN avec teaming* * Teaming est pris en charge sur Windows® 10 RS2 et au-delà. • Prend en charge la fonction d’ é conomie d’ é nergie Ethernet 802.3az...
  • Page 61 ** Prend en charge la PCIe RAID (sur M2_2 et M2_3) ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 Connecteur • 1 x Virtual RAID sur embase de processeur • 1 x embase TPM...
  • Page 62 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x Connecteur audio panneau avant (15μ Connecteur audio or) • 1 x connecteur Thunderbolt AIC (5 broches) • 2 x embases USB 2.0 (4 ports USB 2.0 pris en charge) (Protection contre les décharges électrostatiques (Protection complète contre...
  • Page 63 • FCC, CE • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o verclocking présente certains risques, incluant des modi- fications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’...
  • Page 64 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court- circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ».
  • Page 65 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère. Embase du panneau Branchez le bouton de mise PLED+...
  • Page 66 Fatal1ty X299 Professional Gaming i9 XE Series Prise DEL d’alimentation Veuillez brancher la DEL SPEAKER DUMMY et haut-parleur d'alimentation du châssis DUMMY (SPK_PLED1 à 7 broches) et le haut-parleur du (voir p.1, No. 19) châssis sur ce connecteur. PLED+ PLED+...
  • Page 67 (USB3_7_8 à 19 broches) Vbus Vbus Vbus IntA_PB_SSRX- (voir p.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Embase USB 3.1 Gen2 Cette carte mère comprend Type C sur panneau avant une embase USB 3.1 Gen2 (USB31_TC_2 à...
  • Page 68 Fatal1ty X299 Professional Gaming i9 XE Series Connecteurs du ventila- Veuillez brancher les câbles teur du châssis du ventilateur sur les (CHA_FAN1 à 4 broches) connecteurs du ventilateur, FAN_SPEED_CONTROL CHA_FAN_SPEED (voir p.1, No. 20) puis reliez le fil noir à la FAN_VOLTAGE (CHA_FAN2 à...
  • Page 69 Connecteur d’alimentation Cette carte mère est dotée de ATX 12V deux connecteurs d’alimenta- (ATX12V1 à 8 broches) tion ATX 12V à 8 broches. Pour (voir p.1, No. 4) utiliser une alimentation ATX à (ATX12V2 à 8 broches) 4 broches, veuillez effectuer les (voir p.1, No.
  • Page 70 Fatal1ty X299 Professional Gaming i9 XE Series Virtual RAID sur embase Ce connecteur prend en charge de processeur Intel® Virtual RAID sur proces- (VROC1 à 4 broches) +3VSB seur et NVME/AHCI RAID sur (voir p.1, No. 29) processeur PCIE. VROC RAID KEY Avec le lancement du produit Intel VROC,il existe trois modes de fonctionnement :...
  • Page 71 2.7 Boutons intelligents La carte mère est équipée de quatre boutons intelligents : Bouton de mise en marche, bouton de réinitialisation, bouton Effacer CMOS et bouton BIOS Flashback, permettant aux utilisateurs d’allumer/éteindre rapidement le système, de réinitialiser le système, d’ e ffacer les valeurs CMOS ou de flasher le BIOS. Bouton d'alimentation Le bouton d'alimentation permet Power...
  • Page 72: Contenuto Della Confezione

    Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in uso.
  • Page 73 • Potenza a 13 fasi • Supporta la tecnologia Intel® Turbo Boost Max 3.0 * I processori 4-Core supportano solo la tecnologia Intel® Turbo Boost 2.0. • Supporto di ASRock Hyper BCLK Engine III • Intel® X299 Chipset Memoria • Tecnologia memoria DDR4 Quad Channel • 8 x alloggi DIMM DDR4...
  • Page 74 Fatal1ty X299 Professional Gaming i9 XE Series • Supporto di AMD Quad CrossFireX , 3-Way CrossFireX and CrossFireX ** 3-Way CrossFireX è supportato solo con CPU con 44 corsie o 28 corsie. • Supporto di NVIDIA® Quad SLI , 3-Way SLI e SLI *** Questa funzione è...
  • Page 75 * È inclusa 1 porta mouse Fatal1ty (USB 2.0) • 1 x Porta USB 3.1 Gen2 di tipo A (10 Gb/s) (ASMedia ASM3142) (Supporto protezione ESD (protezione ASRock Full Spike)) • 1 x Porta USB 3.1 Gen2 di tipo C (10 Gb/s) (ASMedia...
  • Page 76 Fatal1ty X299 Professional Gaming i9 XE Series * Se M2_3 è occupato da un dispositivo M.2 di tipo SATA, SATA3_7 sarà disabilitato. • 2 x Connettori SATA3 6,0Gb/s ASMedia ASM1061, supportano NCQ, AHCI e Hot Plug • 1 x socket Ultra M.2 (M2_2), supporta il modulo M.2 SATA3 6,0 Gb/s di tipo 2230/2242/2260/2280/22110 ed il modulo M.2...
  • Page 77 • 1 x Connettore Thunderbolt AIC (5-pin) • 2 x connettori USB 2.0 (supporto di 4 porte USB 2.0) (suppor- to protezione da scariche elettrostatiche (ASRock Full Spike Protection)) • 2 x Collettori USB 3.1 Gen1 (supporto di 4 porte USB 3.1...
  • Page 78 • FCC, CE • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di stru- menti di overclocking di terze parti.
  • Page 79 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati"...
  • Page 80 Fatal1ty X299 Professional Gaming i9 XE Series 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà...
  • Page 81 Connettore LED Collegare i LED alimentazione e SPEAKER DUMMY alimentazione e l’altoparlante a questo connettore. DUMMY altoparlante (SPK_PLED1 a 7 pin) (vedere pag. 1, n. 19) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi dieci connettori SATA3 (SATA3_0_1: supportano cavi dati SATA per vedere pag.
  • Page 82 Fatal1ty X299 Professional Gaming i9 XE Series (USB3_7_8 a 19 pin) Vbus Vbus Vbus IntA_PB_SSRX- (vedere pag. 1, n. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Connettore USB 3.1 Gen2 È presente un connettore USB 3.1...
  • Page 83 Connettori ventola telaio Collegare i cavi della (CHA_FAN1 a 4 pin) ventola ai connettori della (vedere pag. 1, n. 20) ventola e far corrispondere FAN_SPEED_CONTROL CHA_FAN_SPEED (CHA_FAN2 a 4 pin) il filo nero al pin di terra. FAN_VOLTAGE (vedere pag. 1, n. 33) Connettore ventola Questa scheda madre è...
  • Page 84 Fatal1ty X299 Professional Gaming i9 XE Series Connettore di alimentazione Questa scheda madre è dotata ATX da 12 V di due connettori di alimen- (ATX12V1 a 8 pin) tazione ATX da 12 V a 8 pin. (vedere pag. 1, n. 4)
  • Page 85 RAID virtuale su connettore Questo connettore supporta RAID virtuale Intel® su CPU e RAID (VROC1 a 4 pin) +3VSB NVME/AHCI su PCIE CPU. (vedere pag. 1, n. 29) VROC RAID KEY Con l'introduzione del prodotto Intel VROC, ci sono tre modalità di funzionamento: Tasto hardware Caratteristiche principali richiesto...
  • Page 86 Fatal1ty X299 Professional Gaming i9 XE Series 2.7 Interruttori intuitivi La scheda madre è dotata di quattro interruttori intuitivi: Tasto d’alimentazione, tasto di ripristino, tasto Clear CMOS ed un tasto BIOS Flashback che consentono di accendere/ spegnere rapidamente il sistema, ripristinare il sistema, cancellare i valori CMOS o aggiornare il BIOS.
  • Page 87: Contenido Del Paquete

    Si esta documentación sufre alguna modificación, la versión actualizada estará disponible en el sitio web de ASRock sin previo aviso. Si necesita asistencia técnica relacionada con esta placa base, visite nuestro sitio web para obtener información específica sobre el modelo que esté...
  • Page 88: Especificaciones

    Fatal1ty X299 Professional Gaming i9 XE Series 1.2 Especificaciones Plataforma • Factor de forma ATX • Circuito impreso (PCB) de 8 capas • Circuito impreso (PCB) de 2 oz de cobre • Admite la familia de procesadores Intel® Core serie X para el zócalo LGA 2066...
  • Page 89 ALC1220 Audio Codec) • Compatible con audio Blu-ray Premium • Compatible con protección por sobretensión (protección total contra picos de ASRock) • Tapas de audio Nichion de la serie Fine Gold • DAC con SNR de 120 dB con amplificador diferencial • Amplificador de auriculares de alta calidad NE5532 para...
  • Page 90 Fatal1ty X299 Professional Gaming i9 XE Series • Compatible con LAN dual con formación de equipos* * La formación de equipos se admite en Windows® 10 RS2 y más. • Admite Ethernet 802.3az de eficiencia energética • Admite PXE • Módulo WiFi Intel® 802.11ac inalámbrica...
  • Page 91 ** Compatible con la PCIe RAID (en M2_2 y M2_3) ** Admite unidad de estado sólido de NVMe como disco de arran- ** Admite el kit U.2 de ASRock Conector • 1 x RAID virtual en base de conexiones de CPU • 1 x Conector TPM...
  • Page 92 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x Conector de audio en el panel frontal (15μ Conector de audio de oro) • 1 x conector Thunderbolt AIC (5 contactos) • 2 x Bases de conexiones USB 2.0 (admite 4 puertos USB 2.0).
  • Page 93 • Preparado para ErP/EuP (se necesita una fuente de alimentac- ión preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web: http://www.asrock.com Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando las...
  • Page 94 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”.
  • Page 95 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base. Cabezal del panel del sistema Conecte el botón de alimentación, (PANEL1 de 9 contactos)
  • Page 96 Fatal1ty X299 Professional Gaming i9 XE Series LED de alimentación y base Conecte el LED de alimentación SPEAKER DUMMY de conexiones para la altavoz del chasis y el altavoz del chasis DUMMY (SPK_PLED1 de 7 contactos) a esta base de conexiones.
  • Page 97 (USB3_7_8 de 19 Vbus Vbus Vbus IntA_PB_SSRX- contactos) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (consulte la pág.1, N.º 11) IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Base de conexiones USB Existe una base de conexiones 3.1 Gen2 de tipo C en el USB 3.1 Gen2 de tipo C en el panel frontal panel frontal en esta placa base.
  • Page 98 Fatal1ty X299 Professional Gaming i9 XE Series Conectores para el venti- Conecte los cables del lador del chasis ventilador a los conectores (CHA_FAN1 de del ventilador y haga FAN_SPEED_CONTROL CHA_FAN_SPEED 4 contactos) coincidir el cable negro con FAN_VOLTAGE (consulte la pág.1, N.º 20) el contacto de conexión a...
  • Page 99 Conector de alimentación Esta placa base contiene dos ATX de 12V conectores de alimentación ATX (ATX12V1 de 8 contactos) de 12V y 8 contactos. Para utilizar (consulte la pág.1, N.º 4) una toma de alimentación ATX (ATX12V2 de 8 contactos) de 4 contactos, conéctela en los (consulte la pág.1, N.º...
  • Page 100 Fatal1ty X299 Professional Gaming i9 XE Series RAID virtual en base de Este conector admite RAID virtual conexiones de CPU en CPU de Intel® y RAID NVME/ (VROC1 de 4 contactos) +3VSB AHCI en CPU PCIE. (consulte la pág.1, N.º 29) VROC RAID KEY Con la introducción del producto VROC de Intel, existen tres modos de funcionamiento:...
  • Page 101 2.7 Interruptores inteligentes La placa base contiene cuatro interruptores inteligentes: Botón de alimentación, Botón de restablecimiento, Botón de borrado de CMOS e Botón de selección de BIOS, lo que permite a los usuarios encender y apagar el sistema, restablecer el sistema, borrar los valores de la CMOS o cambiar entre la BIOS A y la BIOS B.
  • Page 102: Комплект Поставки

    вами материнской платы. На веб-сайте ASRock также можно найти самый последний перечень поддерживаемых VGA-карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки • Системная плата ASRock Fatal1ty X299 Professional Gaming i9 XE Series (форм- фактор ATX) • Краткое руководство по установке системной платы ASRock Fatal1ty X299 Professional Gaming i9 XE Series • Компакт-диск...
  • Page 103: Технические Характеристики

    • Система питания 13 • Поддерживается технология Intel® Turbo Boost Max 3.0. * Примечание: 4-ядерные процессоры поддерживают только технологию Intel® Turbo Boost 2.0. • Поддержка системы ASRock Hyper BCLK Engine III Чипсет • Intel® X299 Память • Четырехканальная память DDR4 • 8 гнезда...
  • Page 104 Fatal1ty X299 Professional Gaming i9 XE Series • Поддержка AMD Quad CrossFireX , 3-Way CrossFireX и CrossFireX ** Режим 3-Way CrossFireX поддерживается только при использовании ЦП с 44 или 28 линиями. • Поддерживаются режимы NVIDIA® Quad SLI , 3-Way и SLI .***...
  • Page 105 * Функция пробуждения ACPI не поддерживается на портах USB3_12. • 4 Порт USB 3.1 Gen1 (с защитой от электростатического напряжения (ASRock Full Spike Protection)) • 3 порта RJ-45 для ЛВС с индикатором (ACT/LINK и SPEED) • 1 кнопка прошивки BIOS • 1 кнопка...
  • Page 106 Fatal1ty X299 Professional Gaming i9 XE Series • 1 слот Ultra M.2 (M2_2), поддерживает модуль M.2 SATA3 типа 2230/2242/2260/2280/22110 с пропускной способностью 6,0 Гб/с и модуль M.2 PCI Express до версии Gen3 x4 (32 Гб/с) с ключом M.** • 2 слота Ultra M.2 (M2_1 и M2_3), поддерживают модули...
  • Page 107 • 1 AIC-разъем Thunderbolt (5-контактный) • 2 x колодки USB 2.0 (4 порта USB 2.0) (с защитой от электростатических разрядов (ASRock Full Spike Protection)) • 2 x Колодки USB 3.1 Gen1 (с поддержкой до 4 портов USB 3.1 Gen1) (концентратор ASMedia ASM1074) (с защитой от...
  • Page 108 • FCC, CE • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте: http://www.asrock.com Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона...
  • Page 109 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». На рисунке показана 3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на них перемычки-колпачка. Перемычка сброса настроек...
  • Page 110 Fatal1ty X299 Professional Gaming i9 XE Series 1.4 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое...
  • Page 111 Колодка светодиодного Предназначена для SPEAKER индикатора питания и подключения светодиодного DUMMY DUMMY динамика корпуса индикатора питания и (7-контактная, динамика корпуса. SPK_PLED1) (см. стр. 1, № 19) PLED+ PLED+ PLED- Разъемы Serial ATA3 Эти десять разъемов SATA3 (SATA3_0_1: предназначены для подключения см.
  • Page 112 Fatal1ty X299 Professional Gaming i9 XE Series (19-контактная, USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (см. стр. 1, № 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Колодка для порта USB 3.1 На материнской плате Gen2 Type C на передней...
  • Page 113 Разъемы вентиляторов Предназначены для корпуса подключения кабелей (4 контактов, разъемов вентиляторов FAN_SPEED_CONTROL CHA_FAN1) и подключения черного CHA_FAN_SPEED FAN_VOLTAGE (см. стр. 1,№ 20) провода к заземлению. (4 контактов, CHA_FAN2) (см. стр. 1, № 33) Разъем для Данная материнская плата дополнительного оснащена 4-контактным вентилятора или помпы разъемом...
  • Page 114 Fatal1ty X299 Professional Gaming i9 XE Series Разъем питания АТХ 12 В Эта материнская (8 контактов, ATX12V1) плата снабжена двумя (см. стр. 1, № 4) 8-контактными разъемами (8 контактов, ATX12V2) питания АТХ 12 В. Чтобы (см. стр. 1, № 3) использовать...
  • Page 115 Колодка для виртуального Этот разъем поддерживает RAID-контроллера на ЦП виртуальный RAID-контроллер (4 контактов, VROC1) Intel® на ЦП и RAID-контроллер +3VSB (см. стр. 1, № 29) NVME/AHCI на шине PCIE ЦП. VROC RAID KEY Благодаря использованию технологии Intel VROC поддерживаются три режима работы: Требуется...
  • Page 116 Fatal1ty X299 Professional Gaming i9 XE Series 2.7 Смарт-переключатели На системной плате размещены четыре электронных переключателя: кнопкой питания, кнопкой сброса, кнопкой очистки CMOS-памяти и кнопкой BIOS Flashback, которые позволяют быстро выключать и выключать систему, сбрасывать систему, сбросить настройки в CMOS-памяти и прошить BIOS.
  • Page 117: Conteúdo Da Embalagem

    Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando. Você também poderá encontrar a lista de placas VGA e CPU mais recentes suportadas no site da ASRock. Site da ASRock http://www.asrock.com.
  • Page 118 Fatal1ty X299 Professional Gaming i9 XE Series 1.2 Especificações Plataforma • Formato ATX • PCB 8 Camadas • PCB 2oz de Cobre • Suporta Processadores da família Intel® Core série X para o Soquete LGA 2066 • Digi Power design • Design com 13 fases de alimentação...
  • Page 119 1 x 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s (AQUAN- TIA® AQC107): • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/ESD (Proteção Total Con- tra Picos ASRock) • Suporta PXE 2 x Gigabit LAN 10/100/1000 Mb/s (1 x Intel® I219V, 1 x Intel® I211AT): • Suporta Wake-On-LAN...
  • Page 120 Fatal1ty X299 Professional Gaming i9 XE Series • Suporta dual LAN com Teaming* * Teaming é suportada no Windows® 10 RS2 e acima. • Suporta Energy Efficient Ethernet 802.3az • Suporta PXE LAN sem fios • Módulo Intel® 802.11ac WiFi (Pacote Gratuito) • Suporta IEEE 802.11a/b/g/n/ac...
  • Page 121 (em M2_2 e M2_3) ** Suporta PCIe RAID (em M2_2 e M2_3) ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 Conector • 1 x RAID Virtual no cabeçote da CPU • 1 x Plataforma TPM • 1 x LED de alimentação e Cabeçote de Autofalante...
  • Page 122 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x Conector de áudio de painel frontal (Conector de Áudio de Outro 15μ) • 1 x Conector Thunderbolt AIC (5 pinos) • 2 x Plataformas USB 2.0 (Suporta 4 portas USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock))
  • Page 123 • Preparada para ErP/EuP (é necessária uma fonte de alimen- tação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferra-...
  • Page 124 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é...
  • Page 125 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre es- tes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe. Suporte do painel Ligue o botão de alimentação, PLED+ PLED-...
  • Page 126 Fatal1ty X299 Professional Gaming i9 XE Series LED de alimentação e Conecte o LED de ali- SPEAKER DUMMY Cabeçote de Autofalante mentação do chassi e o DUMMY (SPK_PLED1 7 pinos) autofalante do chassi a este (ver p.1, N.º 19) cabeçote.
  • Page 127 (USB3_7_8 de 19 pinos) Vbus Vbus Vbus IntA_PB_SSRX- (ver p.1, N.º 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Painel Frontal Cabeçote Há um Painel Frontal USB 3.1 Gen2 Tipo C Cabeçote USB 3.1 Gen2 (USB31_TC_2 de 26 Tipo C nesta placa mãe.
  • Page 128 Fatal1ty X299 Professional Gaming i9 XE Series Conectores da Ventoinha Por favor, conecte os do Chassi cabos do ventilador aos (CHA_FAN1 de 4 pinos) conectores do ventilador e FAN_SPEED_CONTROL CHA_FAN_SPEED (ver p.1, N.º 20) corresponda o fio preto no FAN_VOLTAGE (CHA_FAN2 de 4 pinos) pino terra.
  • Page 129 Conector de alimentação Esta placa-mãe inclui dois conec- de 12V ATX tores de alimentação de 12V (ATX12V1 de 8 pinos) ATX de 8 pinos. Para utilizar (ver p.1, N.º 4) uma fonte de alimentação ATX (ATX12V2 de 8 pinos) de 4 pinos, introduza-a no Pino 1 (ver p.1, N.º...
  • Page 130 Fatal1ty X299 Professional Gaming i9 XE Series RAID Virtual no cabeçote Este conector suporta Intel® Virtu- da CPU al RAID na CPU e RAID NVME/ (VROC1 de 4 pinos) +3VSB AHCI na CPU PCIE. (ver p.1, N.º 29) VROC RAID KEY Com a introdução do produto Intel VROC, existem três modos de operação:...
  • Page 131 2.7 Interruptores inteligentes A placa-mãe tem quatro chaves inteligentes: Botão liga/desliga, Botão de Reset, Botão para Limpar CMOS e uma Botão BIOS Flashback BIOS, que permite aos usuários rapidamente ligar/desligar o sistema, reiniciar o sistema, limpar os valores de CMOS ou inicializar de flash.
  • Page 132: Ambalaj İçeriği

    ASRock'ın web sitesinde bulabilirsiniz. ASRock web sitesi http://www.asrock.com. 1.1 Ambalaj İçeriği • ASRock Fatal1ty X299 Professional Gaming i9 XE Series Ana Kart (ATX Form Faktörü) • ASRock Fatal1ty X299 Professional Gaming i9 XE Series Hızlı Kurulum Kılavuzu • ASRock Fatal1ty X299 Professional Gaming i9 XE Series Destek CD'si • 1 tane G/Ç...
  • Page 133 * Desteklenen en yüksek bellek frekansı, işlemci türüne göre değişiklik gösterebilir. * Ayrıntılı bilgi için ASRock'ın web sitesindeki Bellek Desteği Listesine bakın. (http://www.asrock.com/) • ECC olmayan RDIMM'ı (Kayıtlı DIMM) destekler • En fazla sistem belleği kapasitesi: 128GB • Intel®...
  • Page 134 Fatal1ty X299 Professional Gaming i9 XE Series • AMD Quad CrossFireX , 3-Way CrossFireX CrossFireX birimlerini destekler ** ** 3 Yönlü CrossFireX yalnızca 44 hatlı veya 28 hatlı CPU ile desteklenir. • NVIDIA® Quad SLI , 3 Yönlü SLI ve SLI 'yi destekler*** *** Bu özellik yalnızca 44 hatlı...
  • Page 135 * 1 tane Fatal1ty Fare Bağlantı Noktası (USB 2.0) dâhildir • 1 tane USB 3.1 Gen2 Tip A Bağlantı Noktası (10 Gb/sn.) (ASMedia ASM3142) (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) • 1 tane USB 3.1 Gen2 Tip C Bağlantı Noktası (10 Gb/sn.) (ASMedia ASM3142) (ESD Koruması...
  • Page 136 Fatal1ty X299 Professional Gaming i9 XE Series * M2_3 bir SATA tipi M.2 aygıtı tarafından kullanılıyorsa, SATA3_7 devre dışı bırakılacaktır. • 2 tane ASMedia ASM1061 SATA3 6,0 Gb/sn. bağlayıcı, NCQ, AHCI ve Tak Çıkar destekler • 1 tane Ultra M.2 Yuvası (M2_2), M Key 2230/2242/2260/2280/22110 tip M.2 SATA3 6,0 Gb/sn.
  • Page 137 • 1 tane Thunderbolt AIC Bağlayıcısı (5 pimli) • 2 tane USB 2.0 Bağlantısı (4 USB 2.0 bağlantı noktası destekler) (ESD Koruması destekler (ASRock Tam Ani Gerilim Koru- ması)) • 2 tane USB 3.1 Gen1 Bağlantısı (4 USB 3.1 Gen1 bağlantı...
  • Page 138 • FCC, CE • ErP/EuP için hazır (ErP/EuP için hazır güç beslemesi gereklidir) * Detaylı ürün bilgisi için lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojisinin uygulanması veya üçüncü taraf hız aşırtma araçlarının kullanılması da dâhil olmak üzere tüm hız aşırtma işlem- lerinin belirli bir risk taşıdığını...
  • Page 139 1.3 Bağlantı Teli Kurulumu Çizim, bağlantı tellerinin kurulumunu göstermektedir. Tel kapağı, pimlerin üzerine yerleştirildiğinde, tel "Kısa" olur. Pimlerin üzerinde tel kapağı bulunmadığında, tel "Açık" olur. Çizim, pin1 ve pin2 alanları "Kısa" olan ve bu iki pim üzerinde bir bağlantı teli kapağı bulunan 3 pimli bağlantı telini göstermektedir. CMOS Temizleme Bağlantı...
  • Page 140 Fatal1ty X299 Professional Gaming i9 XE Series 1.4 Yerleşik Bağlantılar ve Bağlayıcılar Yerleşik bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ve bağlayıcılar üzerine yerleştirilmesi ana karta kalıcı hasar verebilir.
  • Page 141 Güç LED’i ve Hoparlör Lütfen kasa güç LED’ini SPEAKER DUMMY Bağlantısı ve kasa hoparlörünü bu DUMMY (7 pimli SPK_PLED1) bağlantıya takın. (bk. s.1, No. 19) PLED+ PLED+ PLED- Seri ATA3 Bağlayıcıları Bu on SATA3 bağlayıcısı, veri (SATA3_0_1: aktarım hızı 6,0 Gb/sn'ye kadar bk.
  • Page 142 Fatal1ty X299 Professional Gaming i9 XE Series (19 pimli USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (bk. s.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Ön Panel Tip C USB 3.1 Bu ana kartta bir Ön Gen2 Bağlantısı...
  • Page 143 Kasa Fanı Bağlayıcıları Lütfen fan kablolarını (4 pimli CHA_FAN1) fan bağlayıcılarına takın (bk. s.1, No. 20) ve siyah teli topraklama FAN_SPEED_CONTROL CHA_FAN_SPEED (4 pimli CHA_FAN2) pimine bağlayın. FAN_VOLTAGE (bk. s.1, No. 33) Kasa İsteğe Bağlı/Su Bu ana kart, bir tane 4 Pompalı...
  • Page 144 Fatal1ty X299 Professional Gaming i9 XE Series ATX 12V Güç Bağlayıcıları Bu anakart, iki tane 8 pimli ATX (8 pimli ATX12V1) 12V güç bağlayıcısı sağlamak- (bk. s.1, No. 4) tadır. 4 pimli ATX güç beslemesi (8 pimli ATX12V2) kullanmak için lütfen Pim 1 ve (bk.
  • Page 145 İşlemci Bağlantısında Bu bağlayıcı, işlemcide Intel® Sanal Sanal RAID RAID ve işlemci PCIE'de NVME/ (4 pimli VROC1) +3VSB AHCI RAID destekler. (bk. s.1, No. 29) VROC RAID KEY Intel VROC ürününün kullanımıyla üç çalışma modu vardır: Donanım anahtarı Önemli özellikler gereklidir • Yalnızca düz geçiş...
  • Page 146 Fatal1ty X299 Professional Gaming i9 XE Series 2.7 Akıllı Anahtarlar Anakartta dört adet akıllı düğme bulunur: Güç Düğmesi, Sıfırlama Düğmesi, CMOS Temizleme Düğmesi ve bir BIOS Flashback Anahtarı kullanıcıların sistemi hızlı bir şekilde açıp kapatmalarını, sistemi sıfırlamalarını, CMOS değerlerini temizlemelerini ya da BIOS'u yükseltmelerini sağlar.
  • Page 147 니다 . ASRock 웹사이트 http://www.asrock.com. 1.1 포장 내용물 • ASRock Fatal1ty X299 Professional Gaming i9 XE Series 마더보드 (ATX 폼 팩터 ) • ASRock Fatal1ty X299 Professional Gaming i9 XE Series 간편 설치 안내서 • ASRock Fatal1ty X299 Professional Gaming i9 XE Series 지원 CD • I/O 패널...
  • Page 148 2800(OC)/2666/2400/2133 비 -ECC, 비버퍼링 메모리 지원 * 지원되는 메모리 주파수는 프로세서 종류에 따라 다를 수 있 습니다 . * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목록을 참조하십시오 . (http://www.asrock.com/) • 비 ECC RDIMM( 등록 DIMM) 지원 • 시스템 메모리 최대 용량 : 128GB • Intel®...
  • Page 149 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s 1 개 (AQUAN- TIA® AQC107): • Wake-On-LAN 지원 • 번개 /ESD 보호 지원 (ASRock 풀 스파이크 보호 ) • PXE 지원 Gigabit LAN 10/100/1000 Mb/s 2 개 (Intel® I219V 1 개 , Intel® I211AT 1 개 ): • Wake-On-LAN 지원...
  • Page 150 * 울트라 USB 전원은 USB3_12 포트에서 지원됩니다 . * ACPI 절전 해제 기능은 USB3_12 포트에서 지원되지 않습니다 . • USB 3.1 Gen1 포트 4 개 (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) • LED 장착 RJ-45 LAN 포트 3 개 (ACT/LINK LED 및 SPEED LED) • BIOS 플래시백...
  • Page 151 기술 지원 (M2_2 및 M2_3 에서 ) ** PCIe RAID 지원 (M2_2 및 M2_3 에서 ) ** NVMe SSD 를 부팅 디스크로 사용 가능하도록 지원 ** ASRock U.2 키트 지원 • 가상 RAID On CPU 헤더 1 개 커넥터 • TPM 헤더 1 개...
  • Page 152 (ASRock 풀 스파이크 보호 )) • USB 3.1 Gen1 헤더 2 개 (USB 3.1 Gen1 포트 4 개 지원 ) (ASMedia ASM1074 허브 ) (ESD 보호 지원 (ASRock 풀 스파 이크 보호 )) • 전면 패널 타입 C USB 3.1 Gen2 헤더 1 개 (ASMedia ASM3142) * 최대...
  • Page 153 * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오 버클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른 다는 것을 유념하십시오 . 오버클로킹은 시스템 안정성에 영향을 주거나 심지어 시스...
  • Page 154 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . 그림 은 3 핀 점퍼를 보여주며 핀 1 과 핀 2 는 점퍼 캡을 씌울 때 “단락”됩니다 .
  • Page 155 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마 십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 섀시의 전원 버튼 , 리셋 시스템 패널 헤더 PLED+ PLED- (9 핀...
  • Page 156 Fatal1ty X299 Professional Gaming i9 XE Series 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 SPEAKER DUMMY (7 핀 SPK_PLED1) 스피커를 이 헤더에 연결 DUMMY (1 페이지 , 19 번 항목 참조 ) 하십시오 . PLED+ PLED+ PLED- 시리얼...
  • Page 157 (19 핀 USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (1 페이지 , 11 번 항목 참조 ) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 전면 패널 타입 C USB 3.1 이 마더보드에는 전 Gen2 헤더 면 패널 타입 C USB 3.1 (26 핀...
  • Page 158 Fatal1ty X299 Professional Gaming i9 XE Series 섀시 팬 커넥터 팬 케이블을 팬 커넥터 (4 핀 CHA_FAN1) 에 연결하고 검은색 와 (1 페이지 , 20 번 항목 참조 ) FAN_SPEED_CONTROL 이어를 접지핀에 연결하 CHA_FAN_SPEED (4 핀 CHA_FAN2) 십시오 . FAN_VOLTAGE (1 페이지...
  • Page 159 ATX 12V 전원 커넥터 이 마더보드에는 8 핀 (8 핀 ATX12V1) ATX 12V 전원 커넥터 두 (1 페이지 , 4 번 개가 탑재되어 있습니다 . 항목 참조 ) 4 핀 ATX 전원공급장치 (8 핀 ATX12V2) 를 사용하려면 핀 1 과 핀 (1 페이지...
  • Page 160 Fatal1ty X299 Professional Gaming i9 XE Series 가상 RAID On CPU 헤더 이 커넥터는 Intel® 가상 RAID on (4 핀 VROC1) CPU 와 NVME/AHCI RAID on (1 페이지 , 29 번 +3VSB CPU PCIE 를 지원합니다 . 항목 참조 ) VROC RAID KEY Intel VROC 제품의...
  • Page 161 2.7 스마트 스위치 마더보드에는 스마트 스위치 네 개가 탑재되어 있습니다 : 전원 버튼 , 리셋 버튼 , CMOS 초기화 버튼 및 BIOS 플래시백 버튼 1 개 . 이 스위치들로 시스템을 빨리 켜고 끄거나 시스템을 리셋하거나 CMOS 값을 지우거나 BIOS 를 플래시할 수 있습니다 . 전원...
  • Page 162 トでは、 最新の VGA カードおよび CPU サポート一覧もご覧になれます。 ASRock ウェブ サイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock Fatal1ty X299 Professional Gaming i9 XE Series マザーボード (ATX フォームフ ァクタ) • ASRock Fatal1ty X299 Professional Gaming i9 XE Series クイックインストールガイ ド • ASRock Fatal1ty X299 Professional Gaming i9 XE Series サポート CD • 1 x I/O パネルシールド...
  • Page 163 • 13 電源フェーズ設計 • Intel® ターボブースト Max テク ノロジー 3.0 に対応 * 4 コアプロセッサは、 Intel® ターボブーストテク ノロジー 2.0 のみ に対応するこ とに注意してく ださい。 • ASRock ハイパー BCLK エンジン III に対応 チップセッ ト • Intel® X299 • クアッとチャンネル DDR4 メモリテク ノロジー メモリ...
  • Page 164 Fatal1ty X299 Professional Gaming i9 XE Series 、 3-Way CrossFireX 、 CrossFireX を • AMD Quad CrossFireX サポート ** ** 3 ウェイ CrossFireX は、 44 レーンまたは 28 レーンの CPU で のみサポートされます。 、 3-Way SLI および SLI に対応します • NVIDIA® Quad SLI *** この機能は、...
  • Page 165 * Ultra USB Power (ウルトラ USB パワー) には USB3_12 ポート上 で対応します。 *ACPI ウェークアップ機能は USB3_12 ポートには対応していませ ん。 • 4 x USB 3.1 Gen1 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) • LED 付き 3 x RJ-45 LAN ポート (ACT/LINK LED と SPEED LED)...
  • Page 166 Fatal1ty X299 Professional Gaming i9 XE Series * SATA タイプ M.2 デバイスで M2_3 を使用している場合は、 SATA3_7 は無効になります。 • 2 x ASMedia ASM1061 の SATA3 6.0 Gb/s コネクタ、 NCQ、 AHCI、 および、 ホッ トプラグ機能に対応 • 1 x ウルトラ M.2 ソケッ ト (M2_2)、 M Key タイプ...
  • Page 167 • 1 x Thunderbolt AIC コネクタ (5 ピン ) • 2 x USB 2.0 ヘッダー (4 個の USB 2.0 ポートに対応) ( 静電気 放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) • 2 x USB 3.1 Gen1 ヘッダー (4 個の USB 3.1 Gen1 ポートに対...
  • Page 168 Fatal1ty X299 Professional Gaming i9 XE Series 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティの オーバークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴い ますのでご注意く ださい。 オーバークロックするとシステムが不安定になったり、 システム のコンポーネントやデバイスが破損するこ とがあります。 ご自分の責任で行ってく ださい。...
  • Page 169 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピ ンに被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被 さっていない場合には、 ジャンパーは 「オープン」 です。 この図は 3 ピンのジャンパー を表し、 ジャンパーキャップがピン 1 とピン 2 に被さっているとき、 これらのピンは 「ショート」 です。 CMOS クリアジャンパー (CLRMOS1) デフォルト CMOS のク リア (p.1、 No. 31 参照) CLRMOS1 を使って CMOS 内のデータをクリアできます。 クリアして、 デフォルト 設定にシステムパラメーターをリセッ...
  • Page 170 Fatal1ty X299 Professional Gaming i9 XE Series 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタ にはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクタにジャンパー キャップを被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源ボタンを接続し、 ボ PLED+ PLED- (9 ピン PANEL1) タンをリセッ トし、 下記の PWRBTN# (p.1、 No. 21 参照) ピン割り当てに従って、 シャーシのシステムス RESET# テータス表示ランプをこ HDLED- のヘッダーにセッ トしま...
  • Page 171 電源 LED とスピーカーヘ シャーシ電源 LED と SPEAKER DUMMY ッダー シャーシスピーカーをこ DUMMY (7 ピン SPK_PLED1) のヘッダーに接続してく (p.1、 No. 19 参照) ださい。 PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら 10 個 の SATA3 コネク タは、 最高 6.0 Gb/s のデータ (SATA3_0_1: p.1、 No. 14 参照) 転送速度で内部ストレージデ...
  • Page 172 Fatal1ty X299 Professional Gaming i9 XE Series (19 ピン USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (p.1、 No. 11 参照) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy フロントパネルタイプ C このマザーボード上に USB 3.1 Gen2 ヘッダー は、 1 つのフロントパネ...
  • Page 173 シャーシファンコネクタ ファンケーブルはファン (4 ピン CHA_FAN1) コネクタに接続し、 黒線と (p.1、 No. 20 参照) アースピンを合わせてく FAN_SPEED_CONTROL CHA_FAN_SPEED (4 ピン CHA_FAN2) ださい。 FAN_VOLTAGE (p.1、 No. 33 参照) シャーシ (オプション) / ウ このマザーボードは、 4- ピ ォーターポンプファンコ ン水冷シャーシファンコ ネクタ ネクタを搭載します。 3 ピ FAN_SPEED_CONTROL CHA_FAN_SPEED (4 ピン CHA_FAN3/W_ ンのシャーシウォーター...
  • Page 174 Fatal1ty X299 Professional Gaming i9 XE Series ATX 12V 電源コネクタ このマザーボードには、 2 個 (8 ピン ATX12V1) の 8 ピン ATX 12V 電源コネ (p.1、 No. 4 参照) クタが装備されています。 4 (8 ピン ATX12V2) ピンの ATX 電源を使用す (p.1、 No. 3 参照) るには、 ピン 1 と 5 に合わせ...
  • Page 175 CPU ヘッダー上の仮想 このコネクタは、 CPU 上の Intel® 仮想 RAID および CPU PCIE 上 RAID (4 ピン VROC1) の NVME/AHCI RAID に対応し +3VSB (p.1、 No. 29 参照) ます。 VROC RAID KEY Intel VROC 製品の導入には、 次の 3 つの動作モードがあります : 必要な HW キー 主な機能 • パススルーのみ...
  • Page 176 Fatal1ty X299 Professional Gaming i9 XE Series 2.7 スマートスイッチ このマザーボードには 4 つのスマートスイッチが装備されています : 電源ボタン、 リセッ トボタン、 ク リア CMOS ボタン、 BIOS フラッシュバックスイッチにより、 シス テムを素早く ON/OFF したり、 システムをリセッ トしたり、 CMOS 値をクリアしたり、 BIOS をフラッシュしたりするこ とができます。 電源ボタン 電源ボタンで、 システムを素 Power 早く オン / オフにできます。...
  • Page 177 用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 Fatal1ty X299 Professional Gaming i9 XE Series 主板(ATX 规格尺寸) • 华擎 Fatal1ty X299 Professional Gaming i9 XE Series 快速安装指南 • 华擎 Fatal1ty X299 Professional Gaming i9 XE Series 支持光盘 • 1 x I/O 面板...
  • Page 178 Fatal1ty X299 Professional Gaming i9 XE Series 1.2 规格 平台 • ATX 规格尺寸 • 8 层 PCB • 2 盎司纯铜电路板 • 支持用于 LGA 2066 Socket 的 Intel® Core X 系列处理器系 列 • Digi Power design • 13 电源相设计 • 支持 Intel® Turbo Boost Max Technology 3.0 * 请注意,4 核处理器只支持...
  • Page 179 • 支持 AMD Quad CrossFireX 、3 向 CrossFireX 和 CrossFireX ** 仅 44 通道或 28 通道的 CPU 支持 3-Way CrossFireX 。 • 支持 NVIDIA® Quad SLI 、3-Way SLI 和 SLI *** 仅 44 通道或 28 通道的 CPU 支持此功能。 • 1 x 垂直 M.2 Socket (Key E),捆绑有 WiFi-802.11ac 模块(在 后...
  • Page 180 Fatal1ty X299 Professional Gaming i9 XE Series • 支持 Dual LAN with Teaming(双网卡网络整合)* * Windows® 10 RS2 以上支持 Teaming。 • 支持高能效以太网 802.3az • 支持 PXE • Intel® 802.11ac WiFi 模块 无线 LAN • 支持 IEEE 802.11a/b/g/n/ac • 支持双频段 (2.4/5 GHz) • 支持最高...
  • Page 181 * 如果 M2_3 被 SATA 型 M.2 设备占用,SATA3_7 将被禁用。 • 2 x SATA3 6.0 Gb/s 接口 (ASMedia ASM1061),支持 NCQ、 AHCI 和热插拔 • 1 x 超级 M.2 接口 (M2_2),支持 M Key 类型 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s 模块和 M.2 PCI Express 模块(最高 Gen3 x4 (32 Gb/s))** • 2 x 超级...
  • Page 182 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x 前面板类型 C USB 3.1 Gen2 接脚 (ASMedia ASM3142) * 支持 USB PD 2.0 最高 12V@3A (36W) 充电 • 1 x Dr. Debug(调试工具),带 LED • 1 x 电源按钮,带 LED • 1 x 重置按钮,带 LED BIOS • 2 x AMI UEFI Legal BIOS,具有多语言...
  • Page 183 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用 第三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成损 坏。执行这项工作您应自担风险和自己承担费用。我们对由于超频而造成的损坏概不 负责。...
  • Page 184 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这 些针脚上没有装跳线帽,跳线 “开路”。此图显示 3 针跳线,当跳线帽装在针 脚 1 和针脚 2 上,它们“短接”。 清除 CMOS 跳线 (CLRMOS1) 清除 CMOS 默认 (见第 1 页,第 31 个) CLRMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设 置,请关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRMOS1 上的针脚 2 和针脚 3 短接 5 秒。但是,请勿在更新 BIOS 后立即清...
  • Page 185 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装到这些 接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将 PLED+ PLED- (9 针 PANEL1) PWRBTN# 机箱上的电源按钮、重置 (见第 1 页, 第 21 个) 按钮和系统状态指示灯连 接到此接脚。在连接线缆 RESET# 前请记下正负针脚。 HDLED- HDLED+ PWRBTN(电源按钮): 连接到机箱前面板上的电源按钮。您可以配置使用电源按钮关闭系统的方式。 RESET(重置按钮): 连接到机箱前面板上的重置按钮。如果计算机死机,无法执行正常重新启动,按重置 按钮重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统处在 S1/S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,此 LED 熄灭。 HDLED(硬盘活动...
  • Page 186 Fatal1ty X299 Professional Gaming i9 XE Series 电源 LED 和扬声器接脚 请将机箱电源 LED 和机 SPEAKER DUMMY (7 针 SPK_PLED1) 箱扬声器连接到此接脚。 DUMMY (见第 1 页,第 19 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这十个 SATA3 接口支持最高 6.0 (SATA3_0_1: Gb/s 数据传输速率的内部存储 见第 1 页, 第 14 个)...
  • Page 187 (19 针 USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (见第 1 页,第 11 个) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板类型 C USB 3.1 此主板上有一个前面板 Gen2 接脚 类型 C USB 3.1 Gen2 接 (26 针 USB31_TC_2) 脚。此接脚用于连接...
  • Page 188 Fatal1ty X299 Professional Gaming i9 XE Series 机箱风扇接口 请将风扇线连接到风扇 (4 针 CHA_FAN1) 接口并使黑线匹配接地 (见第 1 页, 第 20 个) FAN_SPEED_CONTROL 针脚。 CHA_FAN_SPEED (4 针 CHA_FAN2) FAN_VOLTAGE (见第 1 页, 第 33 个) 机箱可选 / 水泵风扇接 此主板提供一个 4 针水 口 冷机箱风扇接口。如果...
  • Page 189 ATX 12V 电源接口 此主板提供两个 8 针 ATX (8 针 ATX12V1) 12V 电源接口。要使用 4 (见第 1 页,第 4 个) 针 ATX 电源,请沿针脚 1 (8 针 ATX12V2) 和针脚 5 插接它。 (见第 1 页,第 3 个) TPM 接脚 此接口支持 Trusted Platform (17 针 TPMS1) Module(信任平台模块,...
  • Page 190 Fatal1ty X299 Professional Gaming i9 XE Series CPU 接脚上虚拟 RAID 此接口支持 CPU 上 Intel® 虚拟 (4- 针 VROC1) RAID 和 CPU PCIE 上 NVME/ +3VSB (见第 1 页,第 29 个) AHCI RAID。 VROC RAID KEY 加入 Intel VROC 产品,有三种模式的操作 : 需要硬件密钥...
  • Page 191 2.7 智能开关 此主板配有 4 个智能开关: 电源按钮、重置按钮、清除 CMOS 按钮和一个 BIOS 回闪按钮,允许用户快速开启 / 关闭系统、重置系统、清除 CMOS 值或 刷新 BIOS。 电源按钮 电源按钮允许用户快速 Power (PWRBTN) 打开 / 关闭系统。 (见第 1 页,第 23 个) 重置按钮 重置按钮允许用户快速 (RSTBTN) Reset 重置系统。 (见第 1 页,第 22 个) 清除 CMOS 按钮 清除...
  • Page 192 Fatal1ty X299 Professional Gaming i9 XE Series 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材...
  • Page 193 主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資訊。您也可以 在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網站 http://www.asrock.com。 1.1 包裝內容 • 華擎 Fatal1ty X299 Professional Gaming i9 XE Series 主機板(ATX 尺寸) • 華擎 Fatal1ty X299 Professional Gaming i9 XE Series 快速安裝指南 • 華擎 Fatal1ty X299 Professional Gaming i9 XE Series 支援光碟...
  • Page 194 Fatal1ty X299 Professional Gaming i9 XE Series 1.2 規格 • ATX 尺寸 平台 • 8 層板 PCB • 2oz 銅製 PCB • 支援 LGA 2066 插座的 Intel® Core X 系列處理器系列 • Digi Power design • 13 電源相位設計 • 支援 Intel® Turbo Boost Max 技術 3.0 * 請注意,4 核心處理器僅支援...
  • Page 195 • 支援 AMD Quad CrossFireX 、3-Way CrossFireX 及 CrossFireX ** 僅 44 或 28 條通道的 CPU 支援 3-Way CrossFireX 。 • 支援 NVIDIA® Quad SLI 、3-Way SLI 及 SLI *** 僅 44 或 28 條通道的 CPU 支援此功能。 • 1 x 垂直 M.2 插座 (Key E),搭售 WiFi-802.11ac 模組 ( 在背 後...
  • Page 196 Fatal1ty X299 Professional Gaming i9 XE Series • 支援雙 LAN 及 Teaming 功能 * * Windows® 10 RS2 及以上支援 Teaming 功能。 • 支援 Energy Efficient Ethernet 802.3az • 支援 PXE • Intel® 802.11ac WiFi 模組 無線 LAN • 支援 IEEE 802.11a/b/g/n/ac • 支援雙頻...
  • Page 197 * 若 M2_3 為 SATA 類型的 M.2 裝置佔用,將會停用 SATA3_7。 • ASMedia ASM1061 的 2 組 SATA3 6.0 Gb/s 支援 NCQ、 AHCI 及熱插拔 • 1 x Ultra M.2 插座 (M2_2),支援 M Key 型 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s 模組與 M.2 PCI Express 模組(最高可達 Gen3 x4 (32 Gb/s))類型 ** • 2 x Ultra M.2 插座(M2_1 和...
  • Page 198 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x 前面板音訊接頭 (15μ 金色音訊接頭 ) • 1 x Thunderbolt AIC 接頭 (5-pin) • 2 x USB 2.0 排針(支援 4 個 USB 2.0 連接埠)(支援靜電 保護 ( 華擎全防護 )) • 2 x USB 3.1 Gen1 排針(支援 4 個 USB 3.1 Gen1 連接埠)...
  • Page 199 • FCC、CE 認證 • ErP/EuP ready(須具備 ErP/EuP ready 電源供應器) * 如需產品詳細資訊,請上我們的網站: http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採用自 由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性,或者甚至 會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。我們對於因超頻 所造成的可能損害概不負責。...
  • Page 200 Fatal1ty X299 Professional Gaming i9 XE Series 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒 有跳線帽套在針腳上,該跳線為「開啟」。圖例顯示當 3-pin 跳線的跳線蓋套 在 pin1 及 pin2 時,這兩個針腳皆為「短路」。 清除 CMOS 跳線 (CLRMOS1) 清除 CMOS (請參閱第 1 頁,編號 31) 預設 您可利用 CLRMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設 設定,請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後, 請使用跳線帽讓 CLRMOS1 上的 pin2 及 pin3 短路約 5 秒。不過,請不要在更...
  • Page 201 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在排 針及接頭上,將造成主機板永久性的受損。 系統面板排針 PLED+ 請依照以下的針腳排列將機 PLED- PWRBTN# (9-pin PANEL1) 殼上的電源按鈕、重設按鈕 (請參閱第 1 頁, 編號 21) 及系統狀態指示燈連接至此 排針。在連接纜線之前請注 RESET# 意正負針腳。 HDLED- HDLED+ PWRBTN ( 電源按鈕 ): 連接至機殼前面板上的電源按鈕。您可設定使用電源按鈕關閉系統電源的方式。 RESET ( 重設按鈕 ): 接至機殼前面板上的重設按鈕。若電腦凍結且無法執行正常重新啟動,按下重設按鈕 即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此 LED 會亮起。系統進 入...
  • Page 202 Fatal1ty X299 Professional Gaming i9 XE Series 電源 LED 及喇叭排針 請將機殼電源 LED 及機 SPEAKER DUMMY (7-pin SPK_PLED1) 殼喇叭連接至此排針。 DUMMY (請參閱第 1 頁,編號 19) PLED+ PLED+ PLED- Serial ATA3 接頭 這十組 SATA3 接頭皆支援 (SATA3_0_1: 內部儲存裝置的 SATA 資料 請參閱第 1 頁,編號 14)...
  • Page 203 (19-pin USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (請參閱第 1 頁,編號 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板 C 類型 USB 3.1 Gen2 本主機板具有一個前面 板 C 類型 USB 3.1 Gen2 排針 (26-pin USB31_TC_2) 排針。此排針用於連接 (請參閱第 1 頁,編號 12) USB 3.1 Gen2 模組,以提...
  • Page 204 Fatal1ty X299 Professional Gaming i9 XE Series 機殼風扇接頭 請將風扇纜線連接至風 (4-pin CHA_FAN1) 扇接頭,並比對黑線及 (請參閱第 1 頁, 編號 20) FAN_SPEED_CONTROL 接地針腳。 CHA_FAN_SPEED (4-pin CHA_FAN2) FAN_VOLTAGE (請參閱第 1 頁, 編號 33) 本主機板配備一個 4-Pin 機殼選購/水冷幫浦風扇接 頭 水冷機殼風扇接頭。若您 (4-pin CHA_FAN3/W_ 計畫連接 3-Pin 機殼水冷 FAN_SPEED_CONTROL CHA_FAN_SPEED PUMP) 風扇,請接至...
  • Page 205 ATX 12V 電源接頭 本主機板配備兩組 8-pin (8-pin ATX12V1) ATX 12V 電源接頭。若 (請參閱第 1 頁, 要使用 4-pin ATX 電源 編號 4) 供應器,請插入 Pin 1 及 (8-pin ATX12V2) Pin 5。 (請參閱第 1 頁, 編號 3) TPM 排針 此接頭支援信賴平台模組 (17-pin TPMS1) (TPM) 系統, 可確保儲存金鑰、 (請參閱第...
  • Page 206 Fatal1ty X299 Professional Gaming i9 XE Series Virtual RAID On CPU 此接頭支援 Intel® Virtual RAID on CPU 及 NVME/AHCI RAID 排針 +3VSB (4-pin VROC1) on CPU PCIE。 (請參閱第 1 頁, VROC RAID KEY 編號 29) 導入 Intel VROC 產品後,共有三種操作模式: 需要硬體金鑰...
  • Page 207 2.7 智慧型開關 主機板設有四個智慧型開關: 電源按鈕、重設按鈕、清除 CMOS 按鈕及一 個 BIOS Flashback 按鈕,可讓使用者迅速開啟/關閉系統、重設系統、清除 CMOS 值或更新 BIOS。 電源按鈕 電源按鈕可讓使用者迅 Power (PWRBTN) 速開啟/關閉系統。 (請參閱第 1 頁,編號 23) 重設按鈕 重設按鈕可讓使用者迅 (RSTBTN) Reset 速重設系統。 (請參閱第 1 頁,編號 22) 清除 CMOS 按鈕 清除 CMOS 按鈕可讓使用 (CLRCBTN) 者迅速清除 CMOS 值。 (請參閱第...
  • Page 208 933(OC)/2800(OC)/2666/2400/2133 non-ECC, memori tanpa buffer * Frekuensi memori maksimum yang didukung dapat bervariasi berdasarkan jenis prosesor. * Lihat Daftar Dukungan Memori di situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) • Mendukung non-ECC RDIMM (DIMM Terdaftar) • Kapasitas maksimum memori sistem: 128GB • Mendukung Intel®...
  • Page 209 • Audio HD 7.1 CH dengan Perlindungan Konten (Realtek ALC1220 Audio Codec) • Mendukung Audio Blu-ray Premium • Mendukung Perlindungan Lonjakan Arus (ASRock Full Spike Protection) • Nichicon Fine Gold Series Audio Caps • 120dB SNR DAC dengan Amplifier Diferensial • NE5532 Premium Headset Amplifier untuk Konektor Audio...
  • Page 210 Fatal1ty X299 Professional Gaming i9 XE Series • Mendukung LAN Ganda dengan Teaming* *Teaming didukung di Windows® 10 RS2 dan lebih. • Mendukung Ethernet Hemat Energi 802.3az • Mendukung PXE LAN Nirkabel • Intel® 802.11ac WiFi Modul • Mendukung IEEE 802.11a/b/g/n/ac • Mendukung Dual-Band (2,4/5 GHz)
  • Page 211 ** Mendukung Teknologi Intel® Optane (pada M2_2 dan M2_3) ** Mendukung PCIe RAID (pada M2_2 dan M2_3) ** Mendukung SSD NVMe sebagai disk boot ** Mendukung Kit ASRock U.2 Konektor • 1 x RAID Virtual pada Header CPU • 1 x Header TPM • 1 x Header LED Daya dan Speaker...
  • Page 212 Fatal1ty X299 Professional Gaming i9 XE Series • 1 x Konektor Audio Panel Depan (15μ Konektor Audio Berwarna Emas) • 1 x Konektor Thunderbolt AIC (5-pin) • 2 x Header USB 2.0 (Mendukung 4 port USB 2.0) (Mendukung Perlindungan ESD (Perlindungan ASRock Full Spike)) • 2 x Header USB 3.1 Gen1 (Mendukung 4 port USB 3.1 Gen1)
  • Page 213 • FCC, CE • Mendukung ErP/EuP (memerlukan catu daya untuk ErP/EuP) * Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga.
  • Page 214: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Page 215: Declaration Of Conformity

    13848 Magnolia Ave, Chino, CA91710 Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard Fatal1ty X299 Professional Gaming i9 XE Series Model Number : Conforms to the following speci cations: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules.
  • Page 216: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) Fatal1ty X299 Professional Gaming i9 XE Series / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Table of Contents