ASROCK Fatal1ty X99X Killer Series User Manual page 82

ODT PARK (CH C)
Configure the memory on die termination resistors' PARK for channel C.
ODT NOM (CH C)
Use this to change ODT (CH C) Auto/Manual settings. The default is [Auto].
ODT WR (CH D)
Configure the memory on die termination resistors' WR for channel D.
ODT PARK (CH D)
Configure the memory on die termination resistors' PARK for channel D.
ODT NOM (CH D)
Use this to change ODT (CH D) Auto/Manual settings. The default is [Auto].
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Memory Power Savings Mode
Configure CKE and related memory power savings features.
FIVR Configuration
CPU Vcore Voltage Mode
Auto: For optimized settings.
Override: The voltage is fixed.
Vcore Voltage Additional Offset
Configure the dynamic Vcore voltage added to the Vcore.
CPU Cache Voltage Mode
Auto: For optimized settings.
Adaptive: Add voltage to the CPU Cache when the system is under heavy loading.
Override: The voltage is fixed.
CPU Cache Voltage Offset
Configure the voltage for the CPU Cache. Setting the voltage higher may increase
system stability when overclocking.
74