Prevention Of Disconnection Of Hdmi Cable - Mitsubishi Electric MTD701S User Manual

P-4 Connection procedure (continued)

Prevention of disconnection of HDMI cable

For connecting an HDMI cable to the connector on the monitor, it is recommended to secure the cable using an accessory clamper
to prevent accidental disconnection.
1. Connect an HDMI cable to the connector on the monitor.
2. Secure the HDMI cable using a clamper (accessory) and a band (accessory).
Remove the screw from the monitor.
Attach the clamper to the monitor using
the screw you have removed in step
Secure the HDMI cable and the clamper
using the band.
NOTE:
The band isn't reusable. The monitor comes
with 2 spare bands.
To replace the band, cut and remove the
existing band and attach a new one of the
same shape (commercially available,
2.5 mm in width and approximately 100 mm
in length).
3. Secure the HDMI cable using a clamper
(accessory).
.
English-19
HDMI cable
Screw
Clamper (accessory)
Band (accessory)
Clamper (accessory)