Snapshot (For Video Recording) - JVC GR-DVL150 Instructions Manual

42
EN
SNAPSHOT Button
Power Switch
VIDEO/DSC Switch (GR-DVL557/
DVL555/DVL357/DVL355 only;
open the LCD monitor to access
this switch.)
Display
SNAP MODE – P I N–UP
FRAME
FUL L
MUL T I – 4
MUL T I – 9
GR-DVL557/DVL555/
DVL357/DVL355 only
NOTES:
To remove the shutter sound,
Even if "MULTI-4" or "MULTI-9" is engaged, Snapshot recording will be performed in the FULL mode during Digital
Zoom or Night-Scope (
If Snapshot recording is not possible, "PHOTO" blinks when SNAPSHOT is pressed.
If Programme AE with special effects (
disabled during Snapshot recording. In such a case, the icon blinks.
If SNAPSHOT is pressed when "DIS" is set to "ON" (
The Motor Drive mode is disabled when "REC SELECT" is set to "
( pg. 49).
During tape playback as well, all snapshot modes are available when "
Menu Screen ( pg. 50). However, the shutter sound is not heard.
During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no
effect in the recorded image.
When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is
recorded onto the tape.
will appear while the snapshot is being taken.
Lock Button
Menu Screen
"BEEP" on pg. 46, 48.
pg. 38).
pg. 38) is engaged, certain modes of Programme AE with special effects are
FOR RECORDING

Snapshot (For Video Recording)

This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the VIDEO/DSC Switch to "VIDEO" (GR-DVL557/
DVL555/DVL357/DVL355 only), then set the Power
Switch to " " while pressing down the Lock Button
located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu Screen
appears.
3
Rotate the MENU/BRIGHT wheel to select "
CAMERA". Press it and the CAMERA Menu appears.
4
Rotate the MENU/BRIGHT wheel to select "SNAP
MODE", then press it.
5
Rotate the MENU/BRIGHT wheel to select the desired
Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select
"1RETURN" and press it twice. The Menu Screen closes.
• The available Snapshot modes are the same as those on
pg. 27.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
If you press during Record-Standby . . .
..... "PHOTO" appears and a still image will be recorded
for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.
If you press during Recording . . .
..... "PHOTO" appears and a still image will be recorded
for approx. 6 seconds, then the normal recording
resumes.
• Regardless of the Power Switch position ("
Snapshot recording takes place using the selected
Snapshot mode.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to serial
photography. (Interval between still images: approx. 1 second)
pg. 47), the Stabiliser will be disabled.
/ " in the Menu Screen
COPY" is set to "OFF" in the
(cont.)
" or " "),