Dubbing; Dubbing To A Vcr - JVC GR-DVL150 Instructions Manual

52
EN
Power Switch
To S
S-Video
cable
(optional)
"Y/C"/"CVBS"
video out select
switch
VCR
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
NOTES:
As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and
the AUX channel for dubbing purposes.
Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they
are being recorded onto the new tape.
Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu Screen (
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu Screen (
remote control (provided).
You can use Playback Zoom (
Connector
cover**
To AV
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To AUDIO, VIDEO*
and -IN connectors
Cable Adapter
(provided)
If your VCR has a
SCART connector, use
the provided cable
adapter.
TV
pg. 60) or Playback Special Effects (

Dubbing To A VCR

[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.
2
Set the VIDEO/DSC Switch to "VIDEO"
(GR-DVL557/DVL555/DVL357/DVL355 only), then
set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch,
turn on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
[For GR-DVL557 owners only]
Set "S/AV INPUT" to "OFF" in the Menu Screen
( pg. 50).
4
Engage the VCR's AUX and Record-Pause modes.
5
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press 4/
6 on the camcorder.
6
Press 4/6 on the camcorder and engage the VCR's
Record mode.
7
Engage the VCR's Record-Pause mode and press 4/6
on the camcorder.
8
Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.
pg. 50).
pg. 50). Or, press DISPLAY on the

DUBBING

pg. 50).
pg. 59) in step 6.
" while