Antenna; Fuse Replacement; Cleaning; Options - Icom iC-F5012 Instruction Manual

3
CONNECTION AND MAINTENANCE

■ Antenna

A key element in the performance of any communication sys-
tems is its antenna. Contact your dealer for more information
regarding antennas and how to install them.

■ Fuse replacement

A fuse is installed in each fuse holder of the supplied DC
power cable*. If a fuse blows or the transceiver stops function-
ing, track down the source of the problem if possible, repair it
and then replace the damaged fuse with a new rated one.
*Depending on the version, only one fuse holder may be attached.
❑ Fuse rating: 10 A (for one fuse holder)/20 A (for two fuse holders)
USE the applicable fuse only.

■ Cleaning

If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
DO NOT use harsh solvents such as benzine or
alcohol, as they will damage the transceiver sur-
faces.
16

■ Options

• OPC-1132A/OPC-347
dc power cable
2 fuse holders are attached. USE only a 20 A fuse.
OPC-1132A : 3 m
OPC-347 : 7 m
• OPC-1939/OPC-2078
acc cable
Allows you to connect to an external terminal.
OPC-1939: D-sub 15-pin, OPC-2078: D-sub 25-pin
• HM-152/HM-152T/HM-148G/HM-148T
HM-152 : Hand microphone
HM-152T : DTMF microphone
HM-148G: Self grounding heavy duty microphone
HM-148T : Self grounding heavy duty DTMF microphone
• SM-26
desktop microphone
• SP-22/SP-30
external speaker
Input impedance : 4 ø
SP-22 : Rated input; 5 W, Max. input; 7 W
SP-30 : Rated input; 20 W, Max. input; 30 W
• UT-108R
dtmf decoder unit
provides pager and code squelch capabilities.
• UT-109R/UT-110R
voice scrambler unit
Non-rolling type (UT-109R) and Rolling type (UT-110R)
voice scrambler units provides higher communication secu-
rity.
hand microphone