Using The Remote Control Unit; Installing The Battery - JVC GR-DVF11 Instructions Manual

38
EN
2
1
1
Knob
Remote sensor

USING THE REMOTE CONTROL UNIT

3
Transmitted beam
effective area
5m (16 ft)
30

Installing The Battery

The RM-V711U Full-Function Remote Control Unit
can operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause, Fast-
Forward and Rewind) of your VCR. It also makes
additional playback functions possible.
•The remote control is provided with the GR-DVF21,
and is optionally available for the GR-DVF11.
•The remote control uses one lithium battery
(CR2025).
1
Pull out the battery holder while pressing the
knob as shown.
2
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
( pg. 2).
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
30
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.