Tape Dubbing - JVC GR-DVF11 Instructions Manual

36
EN
To Video
Output*
White to
Audio
Output L
Audio cable
(optional)
Video cable
(optional)
White to
AUDIO L IN
To VIDEO IN*
VCR (Recording deck)
* Connect when an S-Video cable is not used.
The connectors
are located
beneath the
cover.
To S-Video
Output
Red to
Audio
Output R
S-Video cable
(optional)
Red to
AUDIO R IN
To S-VIDEO IN
TV

Tape Dubbing

1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 32 and 33.
2
Set the camcorder's Power Switch to "
the VCR's power, and insert the appropriate cassettes
in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press 4/
6 on the camcorder.
5
Press 4/6 on the camcorder and engage the VCR's
Record mode.
6
Engage the VCR's Record-Pause mode and press
4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
You can use Playback Zoom (
Special Effects ( pg. 41) in step 5.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DISPLAY" to "ON" or "OFF" in the Playback
Menu ( pg. 30).
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Playback
Menu ( pg. 30).
•Playback Sound Mode Display
.... set the Power Switch to "
and set "ON SCREEN" in the Date/Time Menu (
pg. 18 – 20) to "ON" or "OFF". Then, set the Power
Switch back to "
TAPE DUBBING
", turn on
pg. 40) or Playback
". Press MENU/BRIGHT
".