Extron electronics CrossPoint Plus 84 User Manual page 34

Operation, cont'd
1 2
1 2
Figure 33 — Example 7: Viewing the audio level, CrossPoint Plus 84,
88, 124, and 128
1 2
1 2
Figure 34 — +8dB displayed, CrossPoint Plus 168 and 1616
D
E
3-14 CrossPoint Plus Matrix Switchers • Operation
Figure 33 and figure 34 show an audio level of +8dB displayed in the output
LEDs on the two different CrossPoint Plus front panels.
LED key:
5
C
INPUTS
3 4 5 6 7 8 9
3 4 5 6 7 8
OUTPUTS
C
+8dB
LED key:
5
INPUTS
3 4 5 6 7 8 9
3 4 5 6 7 8 9
OUTPUTS
+8dB
Press and release the View (
displayed in the output LEDs by 1dB. Press and release the View (
several more times to decrease the audio level displayed in the output LEDs
by an additional 1dB per button push. Note the output LED, View LED, and
Esc LED changes that occur each time the View (
released. Figure 35 and figure 36 show the result of pressing the View (
button a total of 9 times.
Both figures show an audio level of -1dB. Note that the Esc (
turned off and that the View (
If another input button is pressed and released, the level value for the current
input is saved and level value for the newly selected input is displayed.
Press and release the Audio button. The Audio LED stops blinking and the
View ( ) LED (if lit), the Esc (
output LEDs turn off.
Both the RGBHV and Audio LEDs light.
= off (value 0 dB), = blinking (value 1dB),
B
= on (value 2dB), = on for 2 seconds, then off
2
C
10 11 12
ENTER
= off (value 0dB, = blinking,
B
= on (value 1dB)
10 11 12 13 14 15 16
10 11 12 13 14 15 16
) button once to decrease the audio level
) button is pressed and
) LED is blinking to indicate a negative level.
) LED (if lit), the selected input LED, and all
B
B
B
AUDIO
CONTROL I/O
PRESET VIEW ESC RGBHV AUDIO
2
A
ESC
C
B
B
TROL I/O
VIEW ESC RGBHV AUDIO
C
) button
)
) LED has