Top Panel Layout - ICON PlatformNano User Manual

Top Panel Layout

Note:
Function operates slightly difference between DAWs. Please refer to your
DAW manual for each function. The following description is based on the functions
that operate in Apple Logic Pro.
1. LCD backlit display

Backlit LCD display shows the parameter values as you adjust them and also
provides feedback about channel selections, operating modes, and more.
2. Channel/Master faders

The touch sensitive fader could be used to adjust the parameter of different
channels. Press the two "Fader" shifting buttons to shift between channels. Also,
by pressing the "Master" button, the fader will turn to control the parameter of
the master channel
3. Knobs

The four rotary encoder knobs are generally used for controlling the track pan

position, aux send levels and EQ of your DAW. You may also preset them to

adjust specific parameters within plug-ins and virtual instruments.
4. Control buttons

4a) Recording channel control buttons section

REC button-Activate and deactivate the recording state of the

associated channel. The switch will light red when the channel is armed.



SOLO button-Turn On and Off the solo state of the associated channel.

The switch will light green when the channel solo state is on and other

channels will be muted.



MUTE button-Activate and deactivate the mute state of the associated

channel. The switch will light blue when the channel is muted.





4b) Motorized fader control buttons section

Fader< button-Shift "one" channel up for all faders (except the

master channel).

Fader> button-Shift "one" channel down for all faders (except the

master channel).
6
1
4b
2
4a
6
3
8
7
5b
5a