Front Panel Layout - ICON PLATFORM M Plus User Manual

Front Panel Layout

3
1
4a
Note: Function operates slightly difference between DAWs. Please refer to your
DAW manual for each function. The following description is based on the functions
that operate in Apple Logic Pro.
1. Channel faders

The eight 100mm motorized faders are generally used for controlling the track

volume of your DAW. They are all touch sensitive to allow override automation

the moment you touch a fader. Also, they are motorized; they will automatically

move to reflect the current level of the selected channels in your DAW

application. Any automation recorded in a project will be reflected by the fader

positions.
2. Master fader

This 100mm motorized fader operates the same as the other 8 faders. It controls

your DAW software's master channel fader.

Note: Except Pro Tools – Pro Tools software is designed in such a way that the


fader next to your last channel fader always acts as the master channel fader.
3. Knobs

The eight rotary encoder knobs are generally used for controlling the track pan

position, aux send levels and EQ of your DAW. You may also preset them to

adjust specific parameters within plug-ins and virtual instruments.
4. Control buttons

4a) Recording channel control buttons section

REC buttons - Activate and deactivate the recording state of the

associated channel. The switch will light red when the channel is armed.



SOLO buttons - Turn On and Off the solo state of the associated channel.

The switch will light red when the channel solo state is on and other

channels will be muted. You could solo multiple channel by pressing SOLO

buttons on additional channels.


MUTE buttons - Activate and deactivate the mute state of the associated



channel. The switch will light red when the channel is muted.
6
2
4b
4c
5