Daisy Chain With Icontrols Or Any I-Series Controllers - ICON iControls Manual

Daisy Chain with iControls or any i-series controllers

You may daisy chain up to 3 units of iControls or any i-series controllers.
Connect the first unit of iControls to your Mac/PC via the USB port.
1
Choose a USB port on your Mac/PC and insert the wide (flat) end of
the USB cable and the other small end (B-type USB pack) to iControls.
Connect the next units of iControls (or iKey/iPad)
2
Insert the wide (flat) end of the USB cable to the first unit of iControls's
second USB port and the other small end (B-type USB jack) to the
second unit iControls's USB port. By following the same procedure,
you may daisy chain with the 3rd unit of iControls (or iKey/iPad).
USB2.0 Cable
USB2.0 Cable
13
Sustain
Octave
Mod Pitch
1 2 3 4
Flam
Artist Hold Roll
f1
e1
f1
Layer
- +
1 2
3 4
Controls
p7 p8 p9
e2 e3 e4 e5
f2 f3 f4 f5
key
P ad
p5 p6
p p p
10 11 12
e6 e7 e8 e9
f6 f7 f8 f9