HYOSUNG XRX125sm Owner's Manual page 20

To change the display, push the switch ⑤
for 0.6 ~ 1 seconds while the display
indicates the clock, trip meter or odometer
you want to change.
To reset the trip meter to zero, push the
switch ⑥
(in the trip meter mode) for 0.6 ~
1 seconds.
Follow the procedure below to adjust the
clock.
1. Push the switch ⑥
0.6 ~ 1 seconds until the hour display blink.
It is the hour reset mode.
2. Adjust the hour display by pushing the
switch ⑤
(in the hour reset mode) for
0.6 ~ 1 seconds.
3. Push the switch ⑥
mode) for 0.6 ~ 1 seconds until the
minutes display blink.
It is the minutes reset mode.
4. Adjust the minutes display by pushing
the switch ⑤
for 0.6 ~ 1 seconds.
5. Push the switch ⑥
mode) 0.6 ~ 1 seconds to resume in the
clock mode.
WARNING
Operating the display while riding can
be hazardous. Removing a hand from
the handlebar can reduce your ability
to control the motorcycle.
Always keep both hands on the
handlebar while riding.
19
(in the clock mode) for
(in the hour reset
(in the minutes reset mode)
(in the minutes reset