HYOSUNG XRX125sm Owner's Manual page 50

◉ ◉ THROTTLE CABLE ADJUSTMENT
�
1. Loosen the lock nut ① .
2. Adjust the cable slack by cable adjuster
②
in or out to obtain the correct slack
0.5 ~ 1.0 mm (0.02 ~ 0.04 in).
3. After adjusting the slack, tighten the lock
nut ① .
WARNING
Inadequate throttle cable play can
cause engine speed to rise suddenly
when you turn the throttle grip. This
can lead to loss of rider control.
Adjust the throttle cable play so that
engine idle speed does not rise due to
throttle grip movement.
CAUTION
After completing throttle cable
adjustment, check that handlebar
movement does not raise the engine
idle speed and that the throttle grip
return smoothly and automatically.
�
CLUTCH ADJUSTMENT
At each maintenance interval, adjust the
clutch cable play by means of clutch cable
adjuster.
The cable play should be 4 mm (0.16 in)
as measured at the clutch lever holder
before the clutch begins to disengage.
�
�
① The clutch lever play
②
The clutch lever adjuster lock nut
③
The clutch lever adjuster
④
The rubber boot
⑤
The clutch cable adjuster
⑥
The clutch cable adjuster lock nut
If you find the play of the clutch incorrect,
adjust it in the following way :
49
�
�
�
�