HP ProCurve 2510G Series Manual page 90

TACACS+ Authentication
Configuring TACACS+ on the Switch
Figure 4-4. Advanced TACACS+ Settings Section of the TACACS+ Server User Setup
4-16
password. The TACACS+ server returns the allowed privilege level to the
switch. You are placed directly into Operator or Manager mode, depending on
your privilege level.
ProCurve(config)# aaa authentication login privilege-mode
The no version of the above command disables TACACS+ single login capa-
bility.
Configuring the TACACS+ Server for Single Login. In order for the sin-
gle login feature to work correctly, you need to check some entries in the User
Setup on the TACACS+ server.
In the User Setup, scroll to the Advanced TACACS+ Settings section. Make
sure the radio button for "Max Privilege for any AAA Client" is checked and
the level is set to 15, as shown in Figure 4-4. Privileges are represented by the
numbers 0 through 15, with zero allowing only Operator privileges (and
requiring two logins) and 15 representing root privileges. The root privilege
level is the only level that will allow Manager level access on the switch.
Then scroll down to the section that begins with "Shell" (See Figure 4-5).
Check the Shell box.