Authentication Parameters - HP ProCurve 2510G Series Manual

Table 4-1. AAA Authentication Parameters
Name Default
console, Telnet, n/a
SSH, web , port-
access, web-
based port
access
enable n/a
- or -
login
local local
- or -
tacacs
- or -
radius
local none
- or -
none
- or -
authorized
login <privilege- privilege-
mode> mode
disabled
num-attempts 3

Authentication Parameters

Range Function
n/a Specifies the access method used when authenticating. TACACS+
authentication only uses the console, Telnet or SSH access methods.
n/a Specifies the privilege level to be configured.
enable: Specifies the Manager (read/write) privilege level for the access
method being configured.
login: Specifies the Operator (read-only) privilege level for the access
method being configured.
n/a Specifies the primary method of authentication for the access method being
configured.
local: Use the username/password pair configured locally in the switch for
the privilege level being configured
tacacs: Use a TACACS+ server.
radius: Use a RADIUS server.
n/a Specifies the secondary (backup) method for the access method being config-
ured.
local: The username/password pair configured locally in the switch for the
privilege level being configured. Cannot be used if the primary
authentication is local.
none: No secondary type of authentication for the specified
method/privilege path. (Available only if the primary method of
authentication for the access being configured is local.)
authorized: Allow access without authentication.
Note: If you do not specify this parameter in the command line, the switch
automatically assigns the secondary method as follows:
• If the primary method is
• If the primary method is
n/a Specifies that the switch will respect the authentication server's privilege level.
The privilege-mode option enables TACACS+ for a single login. The authorized
privilege level (Operator or Manager) is returned to the switch by the TACACS+
server.
1 - 10 In a given session, specifies how many tries at entering the correct username/
password pair are allowed before access is denied and the session terminated.
TACACS+ Authentication
Configuring TACACS+ on the Switch
tacacs
, the secondary method is
local
, the secondary method is
local
.
none
.
4-13