Parts List Introduction - Sno-Way STD200000 Service & Parts Manual

Back to Index
Our dealership network stands by to provide you with any assistance you may require, including genuine Sno-Way
service parts. All parts should be obtained from or ordered through your dealer. Give complete information about the
part as well as the Model Number and Serial Number of your machine.
Record the Serial Number in the space provided in your Owner's Manual for quick reference. The Serial Number for the
unit is on a plate located on the left frame gusset of the Hopper Frame.
"Right" and "Left" are determined from a position sitting on the Operators Seat of the vehicle.
We reserve the right to make changes or improvements in the design or construction of any part without incurring the
obligation to install such changes in any unit previously delivered.
Below is parts listing with four columns. The first column is the "ITEM", the second is the "PART NUMBER", The third is
the "DESCRIPTION" and the fourth is the "QUANTITY".
The "ITEM" is the number used in the corresponding illustration.

PARTS LIST INTRODUCTION

USING THIS PARTS LIST
The "PART NO." Is the number used to order replacement parts. If a number does not appear
in the column the part is only available by ordering the complete assembly.
The "DESCRIPTION" is the name of the replacement part. At times the name
may be indented, this means that the indented parts are part of the preceding
assembly.
ITEM PART NO.
1 96100083 O-ring
2 96001529 Elbow
3 98100036 Capscrew, Hex.,3/8"-16NC x 7/8"9
The "QTY." Is the quantity needed to service the assembly
illustrated, not the complete product.
DESCRIPTION
1
3
QTY.
2