Arriflex Sr-2; Super 16 Converted Sr-1 Or Sr-2 - CEI Color Six Operator's Manual

36

Arriflex SR-2

The Arri standard T-bar cannot be used with the Color Six .
Instead, a beam splitter system is used to connect the Color
Six to the Arri SR-2. The beam splitter is a conversion of the
standard viewing system, and is more compact and less
expensive than the standard T-bar. A standard T-bar can also
be converted for use with the Color Six .
Your standard viewer can be converted by CEI. Contact the
factory for conversion turnaround times. Optics for this
system are included in the conversion.
To attach the Color Six to the Arri SR-2, see the detailed
illustrations that follow.
Once set up, the Color Six can be quickly removed from the
Arri SR-2 and reinstalled without adjustment. Removed, the
viewer system can be rotated for shipping in small contain-
ers.
It is possible to remove the entire splitter and restore the
viewer to its original configuration. This is unnecessary,
however, because with the improved optics, the splitter
system is virtually as bright in the eyepiece as the uncon-
verted system. Realignment is required if the splitter is
removed and reinstalled.

Super 16 Converted SR-1 or SR-2

SR/CEI conversions sold since 1998 have provisions to
accept a reducing optic for Super 16 coverage if installed on
a Super 16 Converted SR.