Arriflex 535A - CEI Color Six Operator's Manual

32
1. Mate the locating key of the 435 to the locating hole on the
face of the tap lens. Thread on and tighten the knurled
mounting ring.
2. Tighten the headpiece dovetail adjustment.
3. Apply power to the Color Six : Viewing the LCD monitor,
adjust image rotation and centering as described on pages 8-
9.
4. Open the tap iris all the way.
5. With an evenly illuminated ground glass (preferably with no
image), loosen the focus lock set screw using a 1/16-inch hex
driver.
6. Rotate the focus adjustment ring to achieve the best overall
focus on the ground glass markings.
7. Again using the 1/16-inch hex driver, gently tighten the
focus lock screw.

Arriflex 535A

A 535A adapter, available from CEI, is necessary to install
the Color Six on an Arriflex 535A system in place of the
Arriflex VOM unit. Proceed as follows:
1. Loosen the 3/32 hex screws in the headpiece dovetail
adjustment on the Color Six .
2. Position the Color Six adapter to align with the wedge shoe.
3. Tighten the 6mm screw in the plate to secure the Color Six
adapter to the 535A.
4. On initial installation, attach the 535A adapter first, then add
the Color Six .