Using The Cei/535B Interface - CEI Color Six Operator's Manual

9. Complete the centering and rotation adjustments using the
controls on the Color Six as described on pages 8-9. Iris
adjustments are made using the Arri optics.

Using the CEI/535B Interface

Use the 535B adapter with a CEI Universal Optical System
containing the letters XR or XI in the serial number.
1. Start with no lens, the clamp screw secured, and the foot slid
to the right, allowing it to clear the camera body.
2. Screw the assembly (using reasonable torque) clockwise into
the 535B.
3. Loosen the 3/32 hex screws in the headpiece dovetail
adjustment on the Color Six .
4. Slide the foot to the left as shown:
5. Loosen the clamp screw and rotate the clamp ring until the
foot rests on the camera body.
6. Screw the lens into the video camera and insert the front of
the lens into the clamp assembly until it seats.
7. Orient the camera as follows:
• XR—The back corner of the video camera should rest on the
body of the 535B.
• XI—Position the Color Six as desired.
8. Tighten the clamp screw using a 3/32-inch hex driver.
9. Use the attaching screws to adjust the tension on the slide.
10. Tighten the headpiece dovetail adjustment.
35