Using The Multipurpose Control - CEI Color Six Operator's Manual

12

Using the Multipurpose Control

This one control has two components on the same knob:
Figure 2: Side view of Color Six
1. A push-button switch, which is used to enter and exit display
and adjustment modes, and to step from higher to lower
levels on the various menus, and
2. A detented shaft-angle encoder that is used to step through
menus, scroll through long messages, and to underline or
adjust the operating parameters of any user adjustable
function.
The push-button switch responds to two stimuli: A brief
press and release (a click), and a press and hold of about a
half-second. A click is used to either select or deselect an
underlined function, or to step from a higher to a lower menu
level. The press and hold is used to move from a lower to a
higher menu level.