Picture Centering; Focus - CEI Color Six Operator's Manual

Figure 1: Adjustments on camera head.

Picture Centering

Image centering is adjusted using the same tool as for
rotation. Two hex head set screws in the headpiece (see
figure 1) can be turned in or out to change the location of the
CCD imaging device to center the optical image.
Because of film camera differences, the adjustment axes may
not be truly horizontal or vertical in all mounting configura-
tions.

Focus

The CEI Custom Universal Optical System is focused by
rotating the lens barrel. To adjust focus,
1. Locate the control ring closest to the video camera on the
lens barrel.
2. Loosen the set screw to free the small plastic handle on the
control ring. While viewing the image on a high-quality
monitor, rotate the ring to make the focus as sharp as
possible.
3. Tighten the set screw gently.
9