Power - CEI Color Six Operator's Manual

accessories, but the back focal distance is unique: This must
be considered if the use of a "normal" C-mount lens is
attempted. Similarly, the CEI Custom Universal Optical
System may not perform as expected if installed in any other
standard C-mount camera.

Power

Power in to the Color Six can be carried on either of two 3-
pin Fischer connectors. Pin assignments for these connectors
are:
1 Ground and power return
2 Positive supply voltage
3 Shutter pulse from film camera
The Color Six will operate on any "clean" DC voltage from
10 to 32 VDC. Within this range, the maximum power
consumption of the camera system will be 5.5 Watts with the
LCD monitor off, 7.5 W with the monitor on, and 8.5 W with
the monitor on HIGH brightness.
The 3-pin connector not used for power in may be used to
supply power to a low-power accessory, such as a pistol grip.
5