Displaying Ensemble Voices - Yamaha Disklavier Operation Manual

4
Press [ > ] until the c cursor is next
to the Piano Part ESBL Out
parameter.
5
Use the [–/NO] and [+/YES]
buttons to set the option to ON.
–/NO
The piano parts are now played by the
internal XG tone generator with the
corresponding MIDI data sent to the MIDI
OUT connector.
40
+/YES
Displaying Ensemble
Voices
When an Ensemble song starts playing back,
MIDI Program Change messages are sent to the
internal XG tone generator. These Program
Change messages tell the tone generator which
voices to select for each ensemble track.
During playback, you can display the voice
assignments of each track and make changes.
1
Play back an Ensemble song, and
press [ > ] until the following
display appears.
2
Use the [–/NO] and [+/YES]
buttons to select the track whose
voice you want to display.
–/NO
3
To change the voice, press [ > ]
until the c cursor is next to the
voice number, then use the [–/NO]
and [+/YES] buttons to select a
voice.
☛ See the Chapter 22 "Internal XG Tone
Generator Voice & Drum Kit List" for a
listing of basic voices.
+/YES
–/NO +/YES