Playing The Piano Parts On The Tone Generator - Yamaha Disklavier Operation Manual

Changing the Tuning Note
TG Master Tune sounds the A key below Middle
C by default, but you can change it to a different
A key.
1
From the TG Master Tune display,
press [>].
The following display appears.
2
Use the [–/NO] and [+/YES]
buttons to select a different key.
A1 A2
A-1
Middle C
Playing the Piano Parts
on the Tone Generator
Normally, piano parts are played back by the
piano. You can, however, change this so that the
piano parts are also played by the internal XG
tone generator or a MIDI instrument connected to
the MIDI OUT connector.
You can use this to double up the Disklavier piano
parts with a different voice, say strings or vibes.
This technique is sometimes referred to as voice
layering or unison.
1
A3 A4
A6
2
3
Press [FUNC.].
FUNC.
The FUNC. indicator lights and the
Function menu appears.
Press [>] until the c cursor is next
to the MIDI Setup option, then
press [ENTER].
The MIDI Setup menu display appears.
With the c cursor next to the
Piano Part option, press [ENTER].
ENTER
The following display appears.
ENTER
39