Displaying Ensemble Voices; Selecting Tracks For The Piano Parts - Yamaha DGT7A Basic Operation Manual

Yamaha dgt7a: operation manual
Hide thumbs Also See for DGT7A:
Table of Contents

Advertisement

Displaying Ensemble
Voices
When an Ensemble song starts playing back,
MIDI Program Change messages are sent to the
internal XG tone generator. These Program
Change messages tell the tone generator which
voices to select for each ensemble track.
During playback, you can display the voice
assignments of each track and make changes.
1
Play back an Ensemble song, and
press [>] until the following
display appears.
2
Use the [–/NO] and [+/YES]
buttons to select the track whose
voice you want to display.
–/NO
3
To change the voice, press [>]
until the c cursor is next to the
voice number, then use the [–/NO]
and [+/YES] buttons to select a
voice.
☛ See Chapter 15 "Internal XG Tone
Generator Voice & Drum Kit List" for a
listing of basic voices.
Note: Changes made above are temporary
changes that are valid only during
playback. To make permanent changes,
see Chapter 8 "Editing Tracks" in the
Advanced Operation Manual.
+/YES
–/NO
+/YES
Selecting Tracks for the
Piano Parts
Normally, the piano plays tracks 1 and 2 which
are the left- and right-hand piano parts. However,
you can temporarily change this so that the piano
plays different tracks. For example, a vibraphone
part on track 5, or a marimba part on track 7 can
be played by the piano.
These assignments remain active throughout the
song. However, when another PianoSoft or
Disklavier GranTouch song is played back, the
piano will play tracks 1 and 2 as normal (L=01
and R=02).
The rhythm track (track 10) can also be played on
the piano. However, since this is a percussion
part, the results are odd, to say the least.
1
Play back an Ensemble song, then
press [>].
A display similar to the following appears.
From the above display we can see that the
Disklavier GranTouch is currently set to
play tracks 1 and 2. That is, "L=01" (track
1), and "R=02" (track 2).
2
Press [>] to select the part whose
track you want to change.
3
Use the [–/NO] and [+/YES]
buttons to choose a different
track.
–/NO
+/YES
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgt2aGrantouchDisklavier grantouch

Table of Contents