How To Start/Cancel Test Mode - Pioneer CDJ-100S Service Manual

CDJ-100S
6.2 ADJUSTMENT

6.2.1 How to Start/Cancel Test Mode

[ Precautions for Test Mode ]
(1) If a soiled or damaged disc is played back and a GFS error is generated, the system may not perform a STOP operation and may run out of
control, although muting ON/OFF will be performed. If the system does run out of control, press the CUE key to switch the power OFF.
(2) Do NOT press any key while an OPEN/CLAMP, SPINDLE KICK, or FOCUS SEARCH operation is in progress. Be sure to wait until the
operation is completed before calling the next operation.
TEST MODE : ON
TEST MODE : PLAY
TEST DISC : YEDS-7
TEST MODE : DISPLAY
Switch Status Display
SLOT-IN MECHANISM Operation Status
TEST MODE : STOP = CANCEL
STOP all operations.
34
KD1
(W116)
V+5
(W120)
Short Point
SIDE B
DISPLAY BOARD ASSY
inwards outwards
Pickup Move
EJECT:
LOAD:
Spindle motor : START
Focus servo : ON
Spindle servo : CLOSE
KD1
(W116)
V+5
(W120)
Short Point
SIDE B
DISPLAY BOARD ASSY
CLOSE
Tracking servo :
OFF
ON
INSIDE SW
S901 SW
S902 SW
OPEN