Table of Contents
Advertisement
CLD-D503, CLD-D570
1.6 ADJUSTMENTS
1.6.1 TEST MODE
1) How to start test mode
With the MAIN
ASSY test mode TP (W564) dropped to
GND, the test mode is started by putting the power switch
ON. (Fig. 1)
After confirming that all FL indicators are lit, remove test
mode jumper wire and GND
connection.
Or, with power
switch ON, press test mode remote control (GGF1067) ESC
key and TEST key in order.
2) How to cancel test mode
Tum power switch OFF.
Or, press test mode remote control
ESC key.
3) Functions and key control: when in test mode
Note:
For keys not on player or on accompanying remote
MAIN ASSY
control, use test mode remote control (GGF1067)
Fig, 1
K¢/PW SKIP
(Refer to Note 1)
Sets to SEARCH Lead Address Input mode.
Designates the SEARCH lead address through keys 0 to 9.
Press the CLEAR [C key if the designated address is incorrect.
Searches the. designated address upon pressing the PLAY key.
© Key operation in the Test mode
Player Status
Key Operation
K4: Shifts the tray in the closed direction and also raises the tum
table while pressing the key.
;
Tey teen
bbl: Shifts the tray in the open direction and also lowers the tum
table while pressing the key.
ao
pray
[cme
SSSCSC—"—~*~—S*S~—'"sS*~*dCSC'C'C*?Y
> PLAY
Tums the disc through TRK Servo OFF
TRK-OFF
TRK Servo OFF
» PLAY
TRK Servo ON
TRK-ON
TRK Servo ON
» PLAY
TRK Servo OFF
TRK-OFF
TRK Servo ON
<401/11> (STEP)
FOCS balance select
'
F-O/F-1
TILT Neutral
+ MULTI— SPEED
TILT Servo ON
T-[] :ON
TILT ON
—MULTI—SPEED | TILT Neutral
TILT Neutral orON
| M¢/D>] SKIP
Setting TILT Servo to OFF, can force TILT to move.
T-1 to TE
<)> SCAN
Can force the slider to move
mi Stor
Son
Stop
Open
:
Play
Note 1: Press SKIP ( @/ PH) Keys after the tray is set to open state by pressing Open ( & ) key. Because, in tray open
state, pressing PLAY ( )
key causes it to set to clamp state and SKIP ( 44 / PI) keys can not function properly. -
Table 1
1-22
Advertisement
Table of Contents
