Replacing The Battery - Sharp SL-6000L Manual

90
Appendix

Replacing the Battery

Caution:
• Before sliding the battery replacement switch to the " " position, make sure
that the Zaurus is turned off and the screen is blank. If this step is not
observed, the memory contents may be changed or lost.
• Only use the "EA-BL09" rechargeable battery.
1.
Turn the Zaurus off.
2.
Slide both battery replacement switches on the back of the Zaurus to the " "
position.
3.
Remove the discharged battery.
4.
Insert the new battery. Make sure that the plus (+) and minus (-) marks on the
battery are aligned correctly with those printed inside the battery compartment.
5.
Push and hold the battery in the direction of the arrow while sliding both of the
battery replacement switches to the " " position.
If the battery is not charged, charge with the supplied AC adapter.
6.
Press the POWER key to turn on the Zaurus.
If the Zaurus does not turn on, try again from step 1.
7.
Check the time and date.