Sharp SL-6000L Manual page 21

11.
The connection will be established. If a new hardware wizard dialog box
appears, follow the wizard until the USB driver is installed.
Note: In the "Hardware Installation Wizard" dialog box, confirm "SL Series Ver
3 (WDM)" as its target hardware, and click "Continue Anyway".
Next, set the PC Link options on the Zaurus.
12.
Tap the "PC Link" icon on the Settings Home screen.
13.
Select "USB-I/O (default)" or "Serial" as the connection.
14.
Tap .
You are now ready to use your Zaurus and the PC software.
19
Getting Started